Showing 1–24 of 421 results

Sort by
Proplus Towel Bar Only 24' X 5/8' Chrome
Moen Shower Tension Rod' Brushed Nickel
Ceramic Glaze Large Corner - Cream

Ceramic Glaze Large Corner – Cream

$19.95

Ceramic Large Corner Shampoo Shelf

Cream Glossy

Quarter round 8 1/2" each direction from corner of shelf

Back Insert: 8 5/8" x 2"

All sizes are approximate

Available only with raised back

Ceramic Corner Shelf Soap / Shampoo

For cleaning, use only all purpose cleaners.

How to install Ceramic Soap Shampoo Dish with tile surrounding

Installation of a ceramic Soap Shampoo Dish without tile surrounding

The above instruction call for Soap Dish or Toilet Paper Holder but can work for most bathroom accessories with similar backing as this Soap Shampoo corner Shelf

Porcelain Soap Dish  Shell Large - Bone Almond Matte

Porcelain Soap Dish Shell Large – Bone Almond Matte

$49.95

Porcelain Soap Dish Shell Small - Bone Almond Matte

Color: Bone Almond Matte

Overall Size: 6" x 6 "

Back Insert = 5 1/2" x 5 1/2"

For cleaning, use only all purpose cleaners.

How to install Ceramic Soap Shampoo Dish with tile surrounding

Installation of a ceramic Soap Shampoo Dish without tile surrounding

The above instruction call for Soap Dish or Toilet Paper Holder but can work for most bathroom accessories with similar backing

 

Invisia Accent Bar - Curved Grab Bar

Invisia Accent Bar – Curved Grab Bar

$209.00

Invisia Accent Bar Support Rail

A bold, stylish way to breathe new life into any bathroom, our Accent Bar can be placed wherever support is needed.

Available in Polished Chrome, Brushed Stainless Steel, Matte Black and Oil Rubbed Bronze

A series of luxurious bathroom accessories that also happen to be a grab bars hidden in plain sight

Invisia??? Collection Safety Enhanced Bathroom Accessories

ADA Compliant

Add a touch of elegance and just the right amount of support with the Accent Ring.

A unique and incredibly solid handrail designed to contour circular shower fixtures and provide support when accessing the controls.

Feature

  • Invisia Accent Bar adds style to any bathroom and supports up to 500lbs
  • 9-Hole flanges make for an easy install anywhere and at any angle to provide support where you want it; stylish flange covers conceal mounting hardware
  • 2-point wall connection provides maximum structural support (NOTE: product must be anchored to structural walls only)
  • Made from rust resistant, #304 stainless steel
  • ADA compliant rail diameter (1.25???); ADA compliant wall clearance (1.50???); Exceeds ADA 4.26.3 structural strength requirements for grab bars and fasteners (250lbs)

Main Feature List

The Invisia Accent Bar is a stylish way to add new life to the safety features of any bathroom. Supporting up to 500lbs / 227kgs, it grants users peace of mind without compromising on aesthetics. The luxurious Accent Bar can be installed anywhere and at any angle that support is needed.

Integrated support rails with a 500lbs / 227kg weight capacity.
Professional grade construction and superior quality fittings ensure years of uncompromising support.

Discreet wall stems with concealed screws.
Meticulously designed wall interface stems render mounting areas virtually invisible.

Multi-Contact wall support.
While two-point contact with the wall structure is standard for most support rails and bathroom accessories, much of the Invisia Collection overachieves with up to 4 points of contact for maximum structural support.

Solid surface.
The soap dish, corner shelf and toilet roll holder all feature beautiful shatterproof surfaces that resist the growth of mold and bacteria.

Invisia Shower Accent Bar Installation Instructions

Deco Electrical Plates Triple GFI  Noce

Deco Electrical Plates Triple GFI Noce

$33.99

Triple Toggle GFI Plain Noce

Plain Collection

Travertine Decorative Electrical cover plate

This resin Triple Toggle GFI Plain Noce decorative cover plate is a fine complement to your backsplash area.

Proplus 24 In. Towel Bar In Chrome
Recessed Soap Dish Porcelain 6 Black Glossy

Recessed Soap Dish Porcelain 6 Black Glossy

$69.95

Porcelain Recessed - Soap Dish

Color - Black Glossy

Approx. Size: 6 1/4" x 6 1/4" Projection 5/16"

Approx. Wall Opening 5 7/8" x 5 7/8" depth 3 7/16"

***** Do not cut wall before get your recess in your hand *****

Stylish and still versatile, this series of highly attractive premium porcelain and ceramic both accessories goes beyond the traditional needs of any bath environment. Offering multiple mountings for all types of surfaces and structures provides superb quality and value for both commercial and residential use.

Our porcelain and ceramics are designed using a distinctive glazing technique, providing the ability to coordinate with a variety of wall tile colors and create a single look unifying the entire tile area of any bathroom. Exceptional yet practical.

Our generous selection of hand-designed products perfectly adapt to any bath. Choices and opportunity to create an excellent and functional area are available at www.flooringsupplyshop.com.

For cleaning, use only all purpose cleaners.

This recess is ready for installation, with no need to waterproof.

Can be used for shower/bathroom

* Color variations inherent in all fired clay products

 

Promessa Shallow Corner Soap Basket Polished Brass

Promessa Shallow Corner Soap Basket Polished Brass

$98.87

Promessa Shallow Corner Soap Basket - Polished Brass

Dimensions 7 3/4" length x 4 7/8" width x 1 3/8" depth

Solid brass basket, brazed construction

PermaTile Installation Kit Include:

Includes (1) ready to install, stainless steel, PermaTile fastener
Includes (2) solid brass standard ferrules for tile thicknesses over 1/4"
Includes (2) solid brass thin-wall ferrules for tile thicknesses under 1/4"
Includes (2) 8-32, stainless steel, phillips-head screws
Includes (2) decorative plugs

Shower Organization Ideas in Thinset and Tile Watch a set of pictures with some great ideas for your shower

FlooringSupplyShop.com is pleased to introduce an installation system designed and engineered specifically for tile mechanics from Tileware.
Traditional hardware installation requires drilling, compromising tile installations. Now, with the PermaTile??? System, tile mechanics have a clear advantage: a simple installation system that adds value to the tile professional

PermaTile??? Fasteners The first non-penetrating, non-intrusive tile fastening system This high quality, stainless steel fastening component will attach with unprecedented strength to wall surfaces with latex modified mortar. This system provides a solution that is simple and measurably strong. PermaTile??? Systems will end unnecessary damages resulting from drilling finished tile work.

  • Will not violate waterproofing, plumbing or wiring no more drilling
  • Mortar-based fastening system
  • Non-corrosive stainless steel fastener
  • Over 10X the strength of standard fastener
  • Tested by TCNA (Tile Council of North America) Designed specifically for tile applications by tile installers
  • Will work with all standard tile products and thicknesses
  • Designed specifically for tile professionals
  • Encourages quick turnaround where shelving is required
  • Eliminates failures resulting from drilling into completed tile work - such as puncturing waterproofing, tile breakage, plumbing and wiring intrusions
  • Eliminates the need for wood blocking behind the wall
  • Installation can occur within the body of a tile or a grout joint
  • Basket mounting can occur immediately after grouting - no special trips
  • Learn how to install in minutes
  • No special tools required

Installation Instructions - Video

Installation Instructions - Read

HealthCraft Bathroom Safety Rail - SS 28 Left

HealthCraft Bathroom Safety Rail – SS 28 Left

$270.00

P.T. Rail??? Wall Mounted Support Rail

Stainless Steel - Left Hand - 28"

Available Rail Length 28??? (71cm) and 32" (81cm)

Available Brushed Stainless Steel, Polished Chrome and White Powder Coat

Available Right or Left Hand

Toilet Roll Holder: Mounts to P.T.Rail??? to reduce reaching / twisting for toilet paper. (optional)

In stock - Ship Same Day

The P.T. Rail??? is a wall mounted support rail which promotes safe standing and transfers to and from a toilet. Combines an exceptionally solid feel, and an innovative offset rail design.

A unique offset support rail for use on one or both sides of a toilet. Hinged or fixed model. Wall or floor mounts depending on installation requirements. Assistance for getting on and off the toilet. Available in left or right hand configurations.

ADA Compliant

Secure - P.T. Rail??? provides rigid support where it is needed - on one or both sides of the toilet.

No Wrist Strain - Unlike vertically aligned dual rail systems, our unique offset rail design prevents wrist strain when using lower rail.

Safe, Out of the way Storage

Folds up to store out of the way, yet pulls down in a instant when needed. Smooth "fluid feel" hinge holds its position wherever you leave it - even halfway up - it will not inadvertently fall down causing impact injuries

Features and Benefits

  • Elegant Design with Integrated Support
  • Solid Construction and Mounting
  • Patented Discreet Wall Mounts that Conceal Mounting Hardware
  • Suitable For Use in a Wet Environment
  • 500lbs / 227kg Weight Capacity
  • Made of 304 Stainless Steel
  • ADA Compliant Rail Diameter and Spacing (ADAAG 4.26.2)
  • Prevent Wrist Strain. Unlike vertically aligned dual rails, the P.T.Rail??? features an offset rail design. This allows for improved use of the lower rail and helps to prevent wrist strain when reaching for the lower rail.
    Convenient And Safe.
  • The hinged P.T.Rail??? easily folds up to store out of the way and will not accidentally fall down causing an impact injury.
  • Unmatched Sturdiness. Unlike other fold down rails that wobble, the P.T.Rail???s??? machined, precision, tension fit hinge creates stable, rock solid support. A proven rail designed to suit home or institutional use.
  • Toilet Roll Holder (sold separately). Add to any P.T.Rail??? to eliminate the need for unnecessary reaching and twisting.

Rail Length 28??? (71cm) and 32" (81cm) options from wall to tip of rail.

ADA Compliant Rail Diameter 1.5" (3.81cm) diameter.

Rail Offset 5.66" (14.38cm) vertical offset. 2" (5.08cm) horizontal offset.

Materials / Finishes

??? Anti-Microbial powder coat white gloss finish (over steel)
??? Bright Triple Chrome Plate (over steel)
??? #4 finish on stainless steel

Wall Plate 5.5x9" (15x23cm) with fastener holes (3/8??? diameter).

Weight Capacity 400lbs/181kg

 

PermaTile 36-42 Grab Bars Gypsum Systems - PG100-515

PermaTile 36-42 Grab Bars Gypsum Systems – PG100-515

$70.26

PermaTile Fastener for 36" - 42" Grab Bars - Gypsum Wallboard Systems - PG100-515

Gypsum Wallboard Systems fastner for wallboard thickness 1/2" to 5/8"

  • Stainless Steel Fastener
  • Fastener for wallboard thickness 1/2"-5/8"
  • Fastener system only works with wood blocking (Do not use wall anchors)
  • Fastener configured specifically for TileWare accessories
  • Refer to installation instructions before use
Note: Fasteners configured specifically for Tileware accessories only

FlooringSupplyShop.com is pleased to introduce an installation system designed and engineered specifically for tile mechanics from Tileware.
Traditional hardware installation requires drilling, compromising tile installations. Now, with the PermaTile??? System, tile mechanics have a clear advantage: a simple installation system that adds value to the tile professional

Installation Instructions - Video

Installation Instructions - Read

 

Combo Straight Grab Traditional Victoria Series

Combo Straight Grab Traditional Victoria Series

$212.18

TileWare Victoria??? Combination 24" Straight Grab - Traditional

Towel Bar and Grab Bar combination

Available colors Brushed Nickel, Polished Chrome and Oil Rub Bronze

Representing the first mortar based combination safety rail ever developed. Stylized with a radius grab, this combination utility offers more flexibility and comfort. Exclusively produced by TileWare for tile professionals.

Solid brass 24" straight grab (assist) bar with towel rod accessory

Dimensions  3/16" length x 1 1/4" OD tube x 1 1/2" depth (from tile wall to inside edge of bar) with mounting posts 18" center-to-center

Distance from center lower edge of assist bar to lower edge of towel rod is 3 1/2"

Installation Kit Include:

  • Includes (1) ready to install, stainless steel, PermaTile??? Fastener with stabilizing bracket and protective thumb screws for tile thicknesses 5/32" to 1/2"
  • Includes (2) stainless steel bushings 16mm x 31mm(.630" x 1.220")
  • Includes (2) 8-32, stainless steel, phillips-head screws for mounting bushings
  • Includes (2) 6-32, stainless steel, phillips-head screws for mounting grab bar

Shower Organization Ideas in Thinset and Tile Watch a set of pictures with some great ideas for your shower

FlooringSupplyShop.com is pleased to introduce an installation system designed and engineered specifically for tile mechanics from Tileware.
Traditional hardware installation requires drilling, compromising tile installations. Now, with the PermaTile??? System, tile mechanics have a clear advantage: a simple installation system that adds value to the tile professional

PermaTile??? Fasteners The first non-penetrating, non-intrusive tile fastening system This high quality, stainless steel fastening component will attach with unprecedented strength to wall surfaces with latex modified mortar. This system provides a solution that is simple and measurably strong. PermaTile??? Systems will end unnecessary damages resulting from drilling finished tile work.

  • Will not violate waterproofing, plumbing or wiring no more drilling
  • Mortar-based fastening system
  • Non-corrosive stainless steel fastener
  • Over 10X the strength of standard fastener
  • Tested by TCNA (Tile Council of North America) Designed specifically for tile applications by tile installers
  • Will work with all standard tile products and thicknesses
  • Designed specifically for tile professionals
  • Encourages quick turnaround where shelving is required
  • Eliminates failures resulting from drilling into completed tile work - such as puncturing waterproofing, tile breakage, plumbing and wiring intrusions
  • Eliminates the need for wood blocking behind the wall
  • Installation can occur within the body of a tile or a grout joint
  • Basket mounting can occur immediately after grouting - no special trips
  • Learn how to install in minutes
  • No special tools required

Installation Instructions - Video

Installation Instructions - Read

 

Ceramic Glaze Soap Dish Shell Glossy Red Rose

Ceramic Glaze Soap Dish Shell Glossy Red Rose

$19.99

Ceramic Soap Dish - Shell Small

Color: Glossy Red Rose

• 5 1/8" x 4 1/2"

Back Insert = 3 3/4" x 1 3/4

How to install Ceramic Soap Dish with tile surrounding

Better-Bench InvisaBolt Support System

Better-Bench InvisaBolt Support System

$36.95

Better-Bench InvisaBolt Support System

INVISABOLT??? The floating bench mounting system

Size 3/4" x 17.5"

Mid point corbel support, For use with BB-ADJR and BB-BR26 when necessary

Better-Bench is an easy to install bench-forming system that replaces the complex methods currently in use.

TO DETERMINE SUPPORT REQUIREMENT FOR BB-R26:

  • This unit may be mounted on THREE (3) support walls WITHOUT any additional support or blocking being necessary*.
  • TWO (2) wall installation with one end of the bench ???open??? requires the use of either a BT-17S (SOLD SEPARATELY) OR (1) Invisabolt (SOLD SEPARATELY) with 4??6 minimum wood blocking.
  • A ???FREE FLOATING??? Installation (without any side wall connection) will REQUIRE (2) Invisabolts with 4??6 minimum wood blocking for the full length of the bench.

TO DETERMINE SUPPORT REQUIREMENT FOR ADJR:

  • Mounting wall to wall up to 36"- No additional support required
  • Mounting wall to wall up to 63" - One(1) BT-17S centered in span OR Two(2) Invisabolt supports
  • Mounting on a back wall and one side wall up to 36"- One(1) BT-17S within 6??? of open-end OR 2 Invisabolt supports
  • Mounting on a back wall and one side wall up to 63" - Three(3) Invisabolt supports required
  • Mounting with no side support up to 36" - Two(2) Invisabolt supports required
  • Mounting with no side support up to 48" - Three(3) Invisabolt supports required
  • Mounting with no side support up to 63" max span - Four(4) Invisabolt supports required

Futures:

  • Engineered 400 lb load capacity on all Better-Bench products, 100 lb load capacity on the Better Tray (BT-17)
  • Install before or after finish tile is applied to vertical surfaces.
  • This fully independent supporting unit, can be mounted to most vertical surfaces quickly and efficiently, saving the installer valuable time.
  • Self-supporting, one-piece frame is easy to install with supplied fasteners, requiring no additional waterproofing or structural reinforcement.
  • Use in wet or dry locations; mount over any U.B.C. approved substrate material.
  • Takes only minutes to mount, place mortar mix (sand & cement), and tile as desired.
  • Long lasting and corrosion resistant materials throughout.

How to Install

  • 1. 4 x 6 Minimum structural wood blocking must be unstacked flush to front face of studs prior to placement of tile substrate. Secure with (4) 16d nails at each end of block. Locate horizontal center-line of blocks to align with center line of BB-ADJR. Wood blocking must extend to the next wall stud beyond the BB-ADJR width. Install tile substrate per manufacturer???s directions.
  • 2. Expend bench to width desired, being sure to keep large holes in front face of the BB-ADJR installation instructions.
  • 3. Viewing from front of bench, locate the 1- 1/8" holes that are visible after bench has been expanded and secured. These are the mounting locations for the INVISABOLT! (drill out exposed metal if necessary)
  • 4. Temporarily place bench in final location and mark center-line of INVISABOLT locations on substrate (you may wish to cut 2 or 3 temporary legs from scrap wood to provide support when completing the ollowing operations!) Set bench unit aside.
  • 5 Using 5/8" bit. drill INVISABOLT mounting locations through substrate into preinstalled blocking for combined depth of 4". Keep drill straight, level, and as perpendicular as possible to wall surface. Be careful not to penetrate other side of finish wall. Slide plastic insulator onto the INVISABOLT and insert through the large hole in front face of BB-ADJR unit and thread into 5/8" pre-drilled locations. Tighten the bolts until INVISABOLT face "just" makes uniform contact with the front face of BB-ADJR. Provide a sufficient amount of additional caulk or liquid waterproofing material to protect INVISABOLT penetration Through bench and wall.
  • 6. Follow Better-Bench ADJR standard method mounting instruction. Steps 2-4 to secure the bench to final position and fill with appropriate fill material. Do not "bury" INVISABOLT head with mortar. Allow mortar to cure at least 48 hrs. Prior to continuing. Tighten INVISABOLTs 1/4 - 1/2 turn or until resistance is about 15 lbs. torque. Do not over tighten or cause a deflection in face or bench.
  • 7. Apply finish material to top of bench, face and exposed ends.
  • Self-supporting, one piece frame is easy to install with supplied fasteners, requiring no additional waterproofing or structural reinforcement.
  • Use in wet or dry locations; mount over any U.B.C. approved substrate material.
  • Takes only minutes to mount, place mortar mix (sand & cement), and tile as desired.

Can the Adjustable bench be cut down?

YES! The adjustable bench can be cut down to achieve a size smaller than 19". To do this, simply slide the two pieces apart, and using a metal cutting blade, cut equal parts off of both pieces to achieve desired length. Then slide the two pieces back together and proceed with installation.

* USE OF FOAM BOARD AS A SUBSTRATE WILL REQUIRE A MINIMUM 2??4 WOOD BACKING TO BE INSTALLED TO PROVIDE FASTENER SUPPORT AT ALL CONNECTING LOCATIONS, INCLUDING BT-17S LOCATIONS, IF APPLICABLE.

*** 4??6 Minimum structural wood blocking must be installed flush to the front face of studs before placement of tile substrate when using the Invisabolt Support system***

This fully independent supporting unit, can be mounted to most vertical surfaces quickly and efficiently, saving the installer valuable time.

Q&A

Can this bench really hold the weight? YES! Better-Bench products have a structurally engineered 400 lb (OR 100 lb for the BT-17) live load capacity without the need to connect directly to the wood framing inside the wall.

How can I be sure? Over 10 years of successful installations performed by professional contractors and homeowners alike provides a high level of assurance. This capability is achieved through the engineering of ???shear force??? rather than pull-out or ???tension??? loading. For instance, you may be familiar with the ease of pulling a fixture of some sort out of a wall when attached with hollow wall anchors in 1/2" gyp board. Have you ever tried to push that fixture straight down? Our suggestion is to try one you will be amazed!

What do I fill it with? A ???dry pack??? deck mortar is used to fill the bench. Do NOT use Thin-Set mortar! The mix ratio of the described mortar is 4 parts sand to 1 part cement ??? you may also use a pre-bagged mortar mix which is available at many of the tile locations that stock Better-Bench products. Additionally, you will find this mix at lumber yards, hardware stores, Home Depot, Lowes, etc. under the common name of mason mix, brick mortar, or deck mud. You will be adding just enough water to allow you to ???chop??? (a garden hoe works best!) the mixture to consistency that allows you to pick up a handful and shape it into a ball without getting it all over your hands. Be sure to blend the mixture to the point that all dry powder pockets have been eliminated.

Then what? Fill the entire bench with the mortar, and pack it tight as you go with a wood float, block of wood or even a steel trowel. Make sure the material is in all corners completely. Allow the mortar to build up about 1/4 ??? 3/8 of an inch along the back wall(s) of the unit and screed it flush to the front lip to provide adequate drainage of the horizontal surface (this is not necessary in ???dry??? areas). Then add a small amount of water to the remaining mix to make it a little bit stickier. You will then apply this mix to the front face and screed it flush with the top and bottom edge of the channel. allow the unit to set sufficiently prior to beginning your tile process.

Do I need to connect to wood studs or install blocking? No! Better-Bench products are designed to meet a 400 LB load capacity by using the supplied hollow wall anchors. However, wood framing members may be encountered during installation, or the installer may just feel more ???comfortable??? connecting to framing. If this is the case, discard the hollow wall anchors and use the pan screws that are also provided.

The Adjustable bench (ADJR) is suitable for mounting directly to the face of the substrate (ultimate method), or after finish tile has been installed. Wood blocking is not required unless INVISABOLT mounting supports are being used in the installation.

What type of backing (substrate) do I need? Better-Bench products are designed to be mounted over a U.B.C. (Uniform Building Code) or T.C.A. (Tile Council of America) approved tile substrate.

The list includes such materials as:

  • Cementitious based substrates
  • Wonderboard
  • Hardibacker
  • Durarock or mortar bed installations
  • Gypsum based substrates
  • Denshield, Green board, or standard sheet rock (in dry areas) As well as over alternative mounting methods:
  • Schluter Ditra
  • Wedi board or any other building code approved surfaces

When should I install the bench, before I start tiling? Better-Bench products are extremely adaptable systems. You may install the product over the finish tile at any time, however, the optimum method would be to mount the product directly to the face of the substrate. This may be done before you begin tiling the wall, or for additional advantage, you may begin tiling and then when you get to the course of tile where you wish to mount the bench, take a few moments and mount the bench at this time. Then finish your wall tile and fill and tile the bench at the end (this method may save a few cuts of tile and eliminates the need to reach under the bench to lay tile).

If you are using the Adjustable bench unit in combination with the Invisabolt support system, pre-installation of a minimum of 4??6 wood blocking prior to the substrate going up is REQUIRED. Please refer to the Adjustable Bench product installation instructions or contact us directly for further assistance.

Do I tile the bottom? It is not necessary to tile the bottom of the BB-30, BB-24, or ADJR bench. It is mounted down the low and therefore the bottom is not visible. The alloyed aluminum will not rust or corrode, and it leaves a smooth metal surface exposed that will not harbor mold or mildew growth, as well as it is easy to clean. you may tile the bottom, if desired, by using a metal bonding tile mastic, or by simply screwing a piece of backer board substrate material to the bottom if the bench with galvanized flathead screws. Remember, you must leave the weep hole clear of any obstruction so that any penetrating moisture will be able to escape from the interior of the bench.

If you are using the BT-17 or BT-17S, we do require that you tile the underneath of the bench. The BT-17 was designed to be used as a shelf and is therefore installed at a higher level than the bench seats, hence leaving the bottom visible. You will notice this size has several holes in the tray, which is designed to allow the mortar mix to slightly penetrate through, in turn providing a surface for the tile to adhere to.

Do I need additional waterproofing?

No! Better-Bench products are designed to mount in a manner that do not require additional waterproofing membranes, nor will it compromise the membranes in the wall. Waterproofing is accomplished by injecting a small amount of caulk in the screw locations prior to their insertion. Additionally, you will apply a bead of caulk over the top most edge of the bench unit where it meets the wall. This will divert any moisture that has penetrated the grout anywhere above the bench line, into the bench itself, and away from the screw locations. Caulk may be added around the fastener heads inside the bench for additional assurance against water penetration at the screw locations.

Does the mortar eat away the aluminum?

Our products are produced of an ???alloyed??? aluminum which is engineered and suitable for a direct mortar contact. Etching of the aluminum does occur and is considered a normal reaction upon mortar contact. In some instances, usually if excessive moisture is allowed to penetrate the finished unit through grout transmission, or if the initial mix is too ???wet???, this reaction may continue to cause unsightly staining of the aluminum. it is therefore recommended that the mix ratio and water content be carefully observed during installation, and that the tiled top surface of the bench be sealed with a commercially available grout sealer. Generally, the sealers are recommended for all tile and grouted surfaces and are easily applied and relatively inexpensive to acquire.

Better Tray (BT-17) Specific Questions

Most Better-Bench product installation guidelines apply to the BT-17. Review also the items posted in that section for pertinent information!

What is the weight limit? The BT-17 has a 100 lb live load capacity due to the amount of fasteners supplied with the unit and based on a retro-fit, or over the tile, method of installation. the capacity can be substantially increased by installing additional fasteners and/or mounting the nit directly to the face of the substrate.

Can I then use this unit for a footrest?

Yes. We are aware that many people are installing the BT-17 low for that very purpose. It is best to mount the unit to the substrate first, if this is an option. Otherwise, you will need to install 3 additional fasteners (not included) that meet or exceed the shear value of the fastener we supply. Call for additional details if necessary.

Do I tile the underneath? Yes. You will need to tile the bottom of the BT-17 due to the exposed mortar. This mortar may harbor mildew or mold growth if not covered.

How do I tile the underneath? The BT-17 was anticipated for a higher mounting location than our other bench products. It has therefore been designed with a series of 1/2??? holes completely perforating the bottom of the unit to make is easy to tile. You install the bottom tiles using standard thin-set or mastic which will adhere via the direct bonding path to the exposed mortar in these holes. Grout and seal as normal.

Better-Bench?? products are manufactured in the U.S.A.

Products listed below are produced of an alloyed aluminum and are sent as one piece. All products are supplied with hollow wall anchors and wood screws. Fastening to studs, blocking, or other framing members is not required. If framing members are encountered, discard hollow wall anchor and use the provided screw with an appropriate pilot hole.

How to Install video's

Better Bench how to Install - Read

FAQ Better Bench and Recess It

Porcelain Glaze Towel Bar Biscuit Glossy

Porcelain Glaze Towel Bar Biscuit Glossy

$39.95

Porcelain Towel Bar - Biscuit Glossy

For more Colors Click here to see the Standard colors or click here to see the Premium colors

Approx Size: 2 1/4" x 4 1/2" x 2 pieces

Porcelain Towel Bar set

??? Towel bars come with 24" plastic bar.

??? Plastic bar is 24" and can be cut down.

How to repair or replace the bar of a Towel Bar

How to install Ceramic Soap Shampoo Dish with tile surrounding

Installation of a ceramic Soap Shampoo Dish without tile surrounding

The above instruction call for Soap Dish or Toilet Paper Holder but can work for most bathroom accessories with similar backing

 

Cast Stone Towel Bar - Ivory

Cast Stone Towel Bar – Ivory

$89.95

Cast Stone Towel Bar with cast stone Bar

Color:  Ivory

Approx Size: 2 pieces of - 2 7/8"  W x 4 3/4" H x 3 1/4" Deep

Back Insert: 2" x 3 1/2"

size: 24" and can be cut to fit your need

Installation and care instructions:

This Towel Bar fixture is pre-sealed and comes with a mounting projection on the back.
For cleaning, use only all purpose cleaners.

??? Allow a cutout area for the projection to fit into.

??? Apply a suitable adhesive (thinset) on the entire surface of the projection, and insert into cutout.

??? Secure the fixture to the wall with tape until permanently bonded.

??? Once stable, apply grout around the perimeter of the fixture for final installation

Porcelain Hotel Mini Soap Dish 6x6 - Standard Colors

Porcelain Hotel Mini Soap Dish 6×6 – Standard Colors

$59.95

Porcelain Hotel Mini Soap Dish 6 - Standard colors

Porcelain Hotel Mini Soap Dish Made of durable, high quality porcelain.

Standard Colors Selection, 25 colors.

Click here to see the Standard colors chart.

For Non-stock colors please allow 24 hours for shipping

Approx Size:

Overall size - 6 1/2" x 6 1/2"

Back recess size - 5 5/8" x 5 5/8" x 2 1/4" Deep

Click here for Diagram

For cleaning, use only all purpose cleaners.

This recess is ready for installation, with no need  for waterproofing,

 

Proplus Toothbrush And Tumbler Holder 4' Wide X 3' Deep
Proplus 18 In. Towel Bar Concealed Screw Chrome Plated
Invisia 2-in-1 Toilet Roll Holder with Integrated Grab Bar

Invisia 2-in-1 Toilet Roll Holder with Integrated Grab Bar

$239.00

Invisia Toilet paper Holder with Integrated Support Rail

Available in Polished Chrome, Brushed Stainless Steel, Matte Black and Oil Rubbed Bronze

A series of luxurious bathroom accessories that also happen to be a grab bars hidden in plain sight

Invisia??? Collection Safety Enhanced Bathroom Accessories

ADA Compliant

Soft lines and graceful curves blend effortlessly with practicality and function.

With a solid handrail that provides discreet support, this fluid and versatile design captures the essence of contemporary and modern flare.

Feature

  • Invisia Toilet Roll Holder disguises safety within a bathroom accessory; curved bar supports up to 500lbs + holds paper
  • Reduces twisting and reaching for both toilet paper and support
  • 4-point wall connection provides maximum structural support (NOTE: product must be anchored to structural walls only)
  • Made from rust resistant, #304 stainless steel
  • ADA compliant rail diameter (1.25???); ADA compliant wall clearance (1.50???); Exceeds ADA 4.26.3 structural strength requirements for grab bars and fasteners (250lbs)

Main Feature List

This is a stunning addition for any bathroom, offering discreet support by the toilet, providing easy accessibility without sacrificing design and decor. This elegant design can support up to 500 pounds of weight when secured to mounting structures, making it an ideal and attractive safety accessory for any bathroom.

Integrated support rails with a 500lbs / 227kg weight capacity.
Professional grade construction and superior quality fittings ensure years of uncompromising support.

Discreet wall stems with concealed screws.
Meticulously designed wall interface stems render mounting areas virtually invisible.

Multi-Contact wall support.
While two-point contact with the wall structure is standard for most support rails and bathroom accessories, much of the Invisia Collection overachieves with up to 4 points of contact for maximum structural support.

Solid surface.
The soap dish, corner shelf and toilet roll holder all feature beautiful shatterproof surfaces that resist the growth of mold and bacteria.

Invisia Toilet paper Holder with Integrated Support Rail Installation Instructions

 

TB6824 - 24 3/4 TOWEL BAR - BRUSH NICKEL
Shower Rod Flange Chrome Plated With Screws - Pair
Porcelain Round Large Corner Shelf - Matte Finish

Porcelain Round Large Corner Shelf – Matte Finish

$44.95

Porcelain Round Large Corner Shelf - Matte Colors

Approx. Size: 8 3/4" x 8 3/4" x 2 5/8" High

For Non-stock other colors please contact us

For cleaning, use only all purpose cleaners.

How to install Ceramic Soap Shampoo Dish with tile surrounding

Installation of a ceramic Soap Shampoo Dish without tile surrounding

The above instruction call for Soap Dish or Toilet Paper Holder but can work for most bathroom accessories with similar backing as this Soap Shampoo corner Shelf

 

Straight Grab Bar 24 Contemporary Victoria Series

Straight Grab Bar 24 Contemporary Victoria Series

$221.60

TileWare Victoria??? Straight Shower Grab Bar - Contemporary

24" Shower Grab Bar straight grab (assist) bar

Available colors Brushed Nickel, Polished Chrome Matte Black and Oil Rub Bronze

Representing the first mortar based combination safety rail ever developed. Stylized with a radius grab, this combination utility offers more flexibility and comfort. Exclusively produced by TileWare for tile professionals.

Solid brass 24" Straight grab (assist) bar

Dimensions 24  3/16" length x 1  1/4" OD tube x 1  1/2" depth (from tile wall to inside edge of bar) with mounting posts 18" center-to-center

Installation Kit Include:

  • Includes (1) ready to install, stainless steel, PermaTile??? Fastener with stabilizing bracket and protective thumb screws for tile thicknesses 5/32" to 1/2"
  • Includes (2) stainless steel bushings 16mm x 31mm(.630" x 1.220")
  • Includes (2) 8-32, stainless steel, phillips-head screws for mounting bushings
  • Includes (2) 6-32, stainless steel, phillips-head screws for mounting shower grab bar

Shower Organization Ideas in Thinset and Tile Watch a set of pictures with some great ideas for your shower

FlooringSupplyShop.com is pleased to introduce an installation system designed and engineered specifically for tile mechanics from Tileware.
Traditional hardware installation requires drilling, compromising tile installations. Now, with the PermaTile??? System, tile mechanics have a clear advantage: a simple installation system that adds value to the tile professional

PermaTile??? Fasteners The first non-penetrating, non-intrusive tile fastening system This high quality, stainless steel fastening component will attach with unprecedented strength to wall surfaces with latex modified mortar. This system provides a solution that is simple and measurably strong. PermaTile??? Systems will end unnecessary damages resulting from drilling finished tile work.

  • Will not violate waterproofing, plumbing or wiring no more drilling
  • Mortar-based fastening system
  • Non-corrosive stainless steel fastener
  • Over 10X the strength of standard fastener
  • Tested by TCNA (Tile Council of North America) Designed specifically for tile applications by tile installers
  • Will work with all standard tile products and thicknesses
  • Designed specifically for tile professionals
  • Encourages quick turnaround where shelving is required
  • Eliminates failures resulting from drilling into completed tile work - such as puncturing waterproofing, tile breakage, plumbing and wiring intrusions
  • Eliminates the need for wood blocking behind the wall
  • Installation can occur within the body of a tile or a grout joint
  • Basket mounting can occur immediately after grouting - no special trips
  • Learn how to install in minutes
  • No special tools required

Installation Instructions - Video

Installation Instructions - Read

 

Copyright © 2022 AMAST. All rights reserved.

Submit you post here.

Please be patient after posting, because your article must be reviewd by one of our editors.
Thank you!

Please complete the required fields.
Please select your image(s) to upload.

New Account

Please complete the details below and we'll be in contact as soon as possible.