Showing 1–24 of 27 results

Sort by
Blanke Permacove Base End Cap 1 and Half Inch

Blanke Permacove Base End Cap 1 and Half Inch

$4.29

Blanke Permacove End Cap 1 1/2" Inch

3/8" for use with Permacove Base Strips 1 1/2"

8 Colors available: White, Tan, Natural, Medium Gray, Jet Black, Charcoal, Brown and Almond

  • A sanitary cove base that matches the beauty of your tile!
  • A solution for tile and stone series without sanitary cove base
  • Eliminates standing water in wall to floor grout joints
  • Ideal for restaurants, restrooms, kitchens & residential showers
  • Offers esthetic design possibilities to enhance the tile installation

Blanke PermaCove is an innovative system that forms a sanitary cove base by installing straight cut pieces of tile and stone onto a flexible extruded PVC base. No longer does a tile design have to be compromised because of the lack of a factory manufactured sanitary cove. The Blanke PermaCove is ideal for restaurants, restrooms, kitchens and public showers where hygiene codes require the prevention of standing water and bacterial growth in the wall/floor joints. It is also recommended for residential showers to prevent unsightly mildew build-up. This easy-to-install system forms to irregular floor/wall connections and is complemented by a full range of accessories.

  • A solution for those series of tile and stone without sanitary cove base.
  • Eliminates standing water in wall to floor grout joints where bacteria and unsightly mildew can grow.
  • Ideal for restaurants, restrooms, kitchens and residential showers.
  • Offers esthetic design possibilities to enhance the tile installation No need to use obtrusive metal sanitary cove substitutes.
  • Easy to install -- flexible extruded PVC base forms to the wall and accommodates irregular floors and walls.
  • A complete range of corner caps and connector accessories are available.

Function. Design. Quality.

Watch the Blanke PermaCove Video

PermaCove Installation Instructions

Metal Tile  Antique Copper 1 x 1

Metal Tile Antique Copper 1 x 1

$53.95

Copper Antique Metal Tile 1 x 1

Murray River Metal Series

This product is made with sheets of solid copper wrapped over a ceramic base. Through oxidization, all copper will patina over time giving it an old world look.

Material: Metal
Sheet Size: 11 1/4" x 11 1/4"
Piece Size: 1" x 1"
Thickness: 3/8"
Color: Antique Copper
Finish: Antique
Backing: Mesh

Copper tiles are made from the solid copper - Overtime they will exhibit the natural oxidizing hues for which copper is famous. The possibilities are endless with Antique Copper Tiles!

Another great design option available for wall trims backsplashes around countertops in kitchen and bath areas, or for any other design projects. Ceramic backing makes theses tiles sturdy enough for wall application and the mesh backing allows for easy handling when tiling around various surfaces.

The individual squares are antique copper tiles, featuring a rich patina finish that brings warmth and luxury to any room. These look amazing whether used by themselves, or as accents to enhance any tile project.

Installation Tips:

  • Epoxy grouts and pre-mixed grouts are not recommended with copper or colored stainless steel because they can chemically damage the surface. The same reaction can also stain the grout.
  • Keep this product more than six inches away from an open flame. Areas of concern would be steam rooms, fireplace surrounds, and back splashes behind cook tops.

Copper tile is not suitable for exterior usage.

Copper tile can be used for both wall and floor.

Features:

  • Color: Antique Copper
  • 121 individual tiles per sheet
  • Individual tile dimension: 25cm x 25cm (approx. 1??? x 1???), 8mm thick (3/8???)
  • 12" x 12" per sheet
  • Each individual tile are with ceramic backing for easy installation and semi-capped around the edges to cover exposed ceramic backing for edges and for use as trims.
  • Color of the tiles may vary slightly from the images shown and the specified sizes are nominal
  • The individual tiles are mounted on a high-quality glass fiber net, which significantly reduces the installation efforts and time
Maintenance

 

Clean with a damp soft cloth or soapy water and sponge if required.

Acid or corrosive solutions are not recommended.

The metal tile finishes may come loose during installation and when peeling the protective film. Few loose pieces are natural and can be stuck on again using super glue, hot glue or any other adhesives for metal.

Each batch of the Copper Antique will vary depending on the weather or more the chemical reaction, during the antique process, of individual lots of sheet copper.

Metal Tiles Specifications and Care

Blanke Aqua Shield 5 inch CUT

Blanke Aqua Shield 5 inch CUT

$5.45

Blanke AQUA SHIELD - 5 inch - CUT PER ORDER

This product sold by linear run.

Blanke AQUA SHIELD is a waterproofing fabric that can be applied with thinset to most surfaces that are dry, flat and structurally sound. Tile can be installed directly on fabric without the cure time required for liquid applied products. Blanke AQUA SHIELD provides a vapor barrier that makes it ideal for steam rooms. The high tensile strength of the Blanke AQUA SHIELD ensures long lasting protection from moisture penetration in continuous wet areas such as shower stalls and bathrooms. In addition to waterproofing, the Blanke AQUA SHIELD engineered blend of fibers also provide exceptional resistance to mold build-up; break-down from strong chemicals; and UV destabilization. A wide range of convenient accessories is available such as Blanke AQUA FLEX for taping movement joints; Blanke AQUA SA, a self-adhesive tape for quick and convenient taping of seams; and preformed corners.

Application.

Check substrate to ensure that it is dry, even and sound. Apply a setting adhesive suitable for the application to the wall or floor substrate with a 4 mm notched trowel. Apply the adhesive on an area approximately 3/8" wider than the Aqua Shield fabric. Cut the fabric to the desired length and place on the substrate in the same manner as when hanging wall paper and smooth out with a wall paper brush (tampico brush). Use a wide flat trowel to carefully embed the fabric into the adhesive ensuring there are no air pockets. Allow at least a 1/4" fabric overlap. The tiles can then be installed immediately onto the Aqua Shield in the normal manner. .

Installation:

1. The surface must be clean, even and load bearing. The substrate must be sufficiently free of moisture. (Use a moisture meter if unsure of moisture content).

2. Porous surfaces like concrete may have to be coated with a suitable primer.

3. General Installation Procedures: All of the detail areas, such as around plumbing pipes, wall-to-floor transitions, wall-to-wall connections (including corners), around drains and movement joints if present, must be sealed up first using convenient Blanke AQUA SHIELD accessories (pipe surrounds, preformed corners, self-adhesive tapes, etc.) After this step is completed, the wall and floor surfaces need to be sealed up using the larger rolls. The ceramic tile can then be installed immediately.

4. Detailed Installation - Plumbing Pipes: Use a 1/4" x 3/16" V - notched trowel to apply the thinset to the substrate around the pipe. Press the Blanke AQUA SHIELD SP or LP around the pipe and against the wall with a trowel. Use the trowel to scrape off excess thinset. Use Blanke AQUA SEAL water proofing adhesive to seal the edges of Blanke AQUA SHIELD SP/LP to the area around the pipe or plumbing fixture.

Blanke Aqua Shield LP

Blanke Aqua Shield LP

$7.99

Blanke AQUA SHIELD - LP

Diameter of hole = 6 9/14"

Length 17 2/3" x 17 2/3"

The Floor Drain Seal allows you to easily install the Aqua Shield Waterproofing Membrane around your floor drain without having to make any additional cuts.

Blanke AQUA SHIELD is a waterproofing fabric that can be applied with thinset to most surfaces that are dry, flat and structurally sound. Tile can be installed directly on fabric without the cure time required for liquid applied products. Blanke AQUA SHIELD provides a vapor barrier that makes it ideal for steam rooms. The high tensile strength of the Blanke AQUA SHIELD ensures long lasting protection from moisture penetration in continuous wet areas such as shower stalls and bathrooms. In addition to waterproofing, the Blanke AQUA SHIELD engineered blend of fibers also provide exceptional resistance to mold build-up; break-down from strong chemicals; and UV destabilization. A wide range of convenient accessories is available such as Blanke AQUA FLEX for taping movement joints; Blanke AQUA SA, a self-adhesive tape for quick and convenient taping of seams; and preformed corners.

Application.

Check substrate to ensure that it is dry, even and sound. Apply a setting adhesive suitable for the application to the wall or floor substrate with a 4 mm notched trowel. Apply the adhesive on an area approximately 3/8" wider than the Aqua Shield fabric. Cut the fabric to the desired length and place on the substrate in the same manner as when hanging wall paper and smooth out with a wall paper brush (tampico brush). Use a wide flat trowel to carefully embed the fabric into the adhesive ensuring there are no air pockets. Allow at least a 1/4" fabric overlap. The tiles can then be installed immediately onto the Aqua Shield in the normal manner. .

Installation:

1. The surface must be clean, even and load bearing. The substrate must be sufficiently free of moisture. (Use a moisture meter if unsure of moisture content).

2. Porous surfaces like concrete may have to be coated with a suitable primer.

3. General Installation Procedures: All of the detail areas, such as around plumbing pipes, wall-to-floor transitions, wall-to-wall connections (including corners), around drains and movement joints if present, must be sealed up first using convenient Blanke AQUA SHIELD accessories (pipe surrounds, preformed corners, self-adhesive tapes, etc.) After this step is completed, the wall and floor surfaces need to be sealed up using the larger rolls. The ceramic tile can then be installed immediately.

4. Detailed Installation - Plumbing Pipes: Use a 1/4" x 3/16" V - notched trowel to apply the thinset to the substrate around the pipe. Press the Blanke AQUA SHIELD SP or LP around the pipe and against the wall with a trowel. Use the trowel to scrape off excess thinset. Use Blanke AQUA SEAL water proofing adhesive to seal the edges of Blanke AQUA SHIELD SP/LP to the area around the pipe or plumbing fixture.

Metal Tile Oil Rubbed Bronze 1 x 1

Metal Tile Oil Rubbed Bronze 1 x 1

$12.90

Composite Metal tile Oil Rubbed Bronze

Sydney Harbor Metals Series

Price per Piece

Ranwik Insert

Size - 1" x 1"

Our metals are the jewelry of the room. Rope Listellos, Liners, Frames, Wall strip-all individually cast and finished.

Our Sculptured Metal collection is made up of the building blocks of the world???s greatest cities and monuments ??? Oil Rub Bronze and Rust metal tile and trim . These illustrious alloys have glistened in many forms over the years. And are now cast elegantly for home decoration. Handsomely finished, Sculptured Metal adorns interior walls and vertical surface areas with ageless appeal.

The rustic sophisticated lines of sculptured rust adapt to both contemporary and classic look, Bronze evokes a feeling of timelessness and splendor.

Add further dimension and contrast by using metal liner as a distinctive border, or give dramatic flair to a slate pattern by integrating it into the design

What is Composite Metal?

Metal Flakes, Ceramic Flakes, Polymer, all poured into mould 20 - 30,minute later it is set up & popped out of the mold

This is not a fired product, keep away apex 10??? from fire place, oven, etc..

 

Blanke Permacove Base End Cap 1 Inch

Blanke Permacove Base End Cap 1 Inch

$4.29

Blanke Permacove End Cap 1 Inch

3/8" for use with Permacove Base Strips 1"

8 Colors available: White, Tan, Natural, Medium Gray, Jet Black, Charcoal, Brown and Almond

  • A sanitary cove base that matches the beauty of your tile!
  • A solution for tile and stone series without sanitary cove base
  • Eliminates standing water in wall to floor grout joints
  • Ideal for restaurants, restrooms, kitchens & residential showers
  • Offers esthetic design possibilities to enhance the tile installation

Blanke PermaCove is an innovative system that forms a sanitary cove base by installing straight cut pieces of tile and stone onto a flexible extruded PVC base. No longer does a tile design have to be compromised because of the lack of a factory manufactured sanitary cove. The Blanke PermaCove is ideal for restaurants, restrooms, kitchens and public showers where hygiene codes require the prevention of standing water and bacterial growth in the wall/floor joints. It is also recommended for residential showers to prevent unsightly mildew build-up. This easy-to-install system forms to irregular floor/wall connections and is complemented by a full range of accessories.

  • A solution for those series of tile and stone without sanitary cove base.
  • Eliminates standing water in wall to floor grout joints where bacteria and unsightly mildew can grow.
  • Ideal for restaurants, restrooms, kitchens and residential showers.
  • Offers esthetic design possibilities to enhance the tile installation No need to use obtrusive metal sanitary cove substitutes.
  • Easy to install -- flexible extruded PVC base forms to the wall and accommodates irregular floors and walls.
  • A complete range of corner caps and connector accessories are available.

Function. Design. Quality.

Watch the Blanke PermaCove Video

PermaCove Installation Instructions

Blanke Permacove Base Strips 4 ft Long

Blanke Permacove Base Strips 4 ft Long

$24.99

Blanke PermaCove Base Strips

Available 1" & 1 1/2" at 4 feet long

  • A sanitary cove base that matches the beauty of your tile!
  • A solution for tile and stone series without sanitary cove base
  • Eliminates standing water in wall to floor grout joints
  • Ideal for restaurants, restrooms, kitchens & residential showers
  • Offers esthetic design possibilities to enhance the tile installation

Blanke PermaCove is an innovative system that forms a sanitary cove base by installing straight cut pieces of tile and stone onto a flexible extruded PVC base. No longer does a tile design have to be compromised because of the lack of a factory manufactured sanitary cove. The Blanke PermaCove is ideal for restaurants, restrooms, kitchens and public showers where hygiene codes require the prevention of standing water and bacterial growth in the wall/floor joints. It is also recommended for residential showers to prevent unsightly mildew build-up. This easy-to-install system forms to irregular floor/wall connections and is complemented by a full range of accessories.

Advantages

  • A solution for those series of tile and stone without sanitary cove base.
  • Eliminates standing water in wall to floor grout joints where bacteria and unsightly mildew can grow.
  • Ideal for restaurants, restrooms, kitchens and residential showers.
  • Offers esthetic design possibilities to enhance the tile installation No need to use obtrusive metal sanitary cove substitutes.
  • Easy to install -- flexible extruded PVC base forms to the wall and accommodates irregular floors and walls.
  • A complete range of corner caps and connector accessories are available.

Function. Design. Quality.

Watch the Blanke PermaCove Video

PermaCove Installation Instructions

Blanke Permacove Base Outside Corner Connector

Blanke Permacove Base Outside Corner Connector

$4.29

Blanke Permacove Outside Corner Connector

Available For use with Permacove Base Strips 1" & 1 1/2"

  • A sanitary cove base that matches the beauty of your tile!
  • A solution for tile and stone series without sanitary cove base
  • Eliminates standing water in wall to floor grout joints
  • Ideal for restaurants, restrooms, kitchens & residential showers
  • Offers esthetic design possibilities to enhance the tile installation

Blanke PermaCove is an innovative system that forms a sanitary cove base by installing straight cut pieces of tile and stone onto a flexible extruded PVC base. No longer does a tile design have to be compromised because of the lack of a factory manufactured sanitary cove. The Blanke PermaCove is ideal for restaurants, restrooms, kitchens and public showers where hygiene codes require the prevention of standing water and bacterial growth in the wall/floor joints. It is also recommended for residential showers to prevent unsightly mildew build-up. This easy-to-install system forms to irregular floor/wall connections and is complemented by a full range of accessories.

  • A solution for those series of tile and stone without sanitary cove base.
  • Eliminates standing water in wall to floor grout joints where bacteria and unsightly mildew can grow.
  • Ideal for restaurants, restrooms, kitchens and residential showers.
  • Offers esthetic design possibilities to enhance the tile installation No need to use obtrusive metal sanitary cove substitutes.
  • Easy to install -- flexible extruded PVC base forms to the wall and accommodates irregular floors and walls.
  • A complete range of corner caps and connector accessories are available.

Function. Design. Quality.

Watch the Blanke PermaCove Video

PermaCove Installation Instructions

Blanke Permacove Base Strips 8 ft Long

Blanke Permacove Base Strips 8 ft Long

$49.99

Blanke PermaCove Base Strips 8 ft long

Available 1 1/2" at 8 feet long and 1" in 4 ft

  • A sanitary cove base that matches the beauty of your tile!
  • A solution for tile and stone series without sanitary cove base
  • Eliminates standing water in wall to floor grout joints
  • Ideal for restaurants, restrooms, kitchens & residential showers
  • Offers esthetic design possibilities to enhance the tile installation

Blanke PermaCove is an innovative system that forms a sanitary cove base by installing straight cut pieces of tile and stone onto a flexible extruded PVC base. No longer does a tile design have to be compromised because of the lack of a factory manufactured sanitary cove. The Blanke PermaCove is ideal for restaurants, restrooms, kitchens and public showers where hygiene codes require the prevention of standing water and bacterial growth in the wall/floor joints. It is also recommended for residential showers to prevent unsightly mildew build-up. This easy-to-install system forms to irregular floor/wall connections and is complemented by a full range of accessories.

Advantages

  • A solution for those series of tile and stone without sanitary cove base.
  • Eliminates standing water in wall to floor grout joints where bacteria and unsightly mildew can grow.
  • Ideal for restaurants, restrooms, kitchens and residential showers.
  • Offers esthetic design possibilities to enhance the tile installation No need to use obtrusive metal sanitary cove substitutes.
  • Easy to install -- flexible extruded PVC base forms to the wall and accommodates irregular floors and walls.
  • A complete range of corner caps and connector accessories are available.

Function. Design. Quality.

Watch the Blanke PermaCove Video

PermaCove Installation Instructions

 

Metal Tile Antique Copper  2 x 2

Metal Tile Antique Copper 2 x 2

$53.95

Copper Antique Metal Tile 2 x 2

Murray River Metal Series

This product is made with sheets of solid copper wrapped over a ceramic base. Through oxidization, all copper will patina over time giving it an old world look.

Material: Metal
Sheet Size: 11 1/4" x 11 1/4"
Piece Size: 2" x 2"
Thickness: 3/8" (8mm)
Color: Antique Copper
Finish: Antique
Backing: Mesh

Copper tiles are made from the solid copper - Overtime they will exhibit the natural oxidizing hues for which copper is famous. The possibilities are endless with Antique Copper Tiles!

Another great design option available for wall trims backsplashes around countertops in kitchen and bath areas, or for any other design projects. Ceramic backing makes theses tiles sturdy enough for wall application and the mesh backing allows for easy handling when tiling around various surfaces.

The individual squares are antique copper tiles, featuring a rich patina finish that brings warmth and luxury to any room. These look amazing whether used by themselves, or as accents to enhance any tile project.

Installation Tips:

  • Epoxy grouts and pre-mixed grouts are not recommended with copper or colored stainless steel because they can chemically damage the surface. The same reaction can also stain the grout.
  • Keep this product more than six inches away from an open flame. Areas of concern would be steam rooms, fireplace surrounds, and back splashes behind cook tops.

Copper tile is not suitable for exterior usage.

Copper tile can be used for both wall and floor.

Features:

  • Color: Antique Copper
  • 12" x 12" per sheet
  • Each individual tile are with ceramic backing for easy installation and semi-capped around the edges to cover exposed ceramic backing for edges and for use as trims.
  • Color of the tiles may vary slightly from the images shown and the specified sizes are nominal
  • The individual tiles are mounted on a high-quality glass fiber net, which significantly reduces the installation efforts and time
Maintenance

 

Clean with a damp soft cloth or soapy water and sponge if required.

Acid or corrosive solutions are not recommended.

The metal tile finishes may come loose during installation and when peeling the protective film. Few loose pieces are natural and can be stuck on again using super glue, hot glue or any other adhesives for metal.

Each batch of the Copper Antique will vary depending on the weather or more the chemical reaction, during the antique process, of individual lots of sheet copper.

Metal Tiles Specifications and Care

 

Bologna Metal Tile Antique Copper 1 x 4

Bologna Metal Tile Antique Copper 1 x 4

$62.95

Copper Antique Metal Tile 1 1/4 x 4

Murray River Metal Series

This product is made with sheets of solid copper wrapped over a ceramic base. Through oxidization, all copper will patina over time giving it an old world look.

Material: Metal
Sheet Size: 11 1/4" x 11 1/4"
Piece Size: 1 1/4" x 4"
Thickness: 3/8"
Color: Antique Copper
Finish: Antique
Backing: Mesh

Copper tiles are made from the solid copper - Overtime they will exhibit the natural oxidizing hues for which copper is famous. The possibilities are endless with Antique Copper Tiles!

Another great design option available for wall trims backsplashes around countertops in kitchen and bath areas, or for any other design projects. Ceramic backing makes theses tiles sturdy enough for wall application and the mesh backing allows for easy handling when tiling around various surfaces.

The individual squares are antique copper tiles, featuring a rich patina finish that brings warmth and luxury to any room. These look amazing whether used by themselves, or as accents to enhance any tile project.

Installation Tips:

  • Epoxy grouts and pre-mixed grouts are not recommended with copper or colored stainless steel because they can chemically damage the surface. The same reaction can also stain the grout.
  • Keep this product more than six inches away from an open flame. Areas of concern would be steam rooms, fireplace surrounds, and back splashes behind cook tops.

Copper tile is not suitable for exterior usage.

Copper tile can be used for both wall and floor.

Features:

  • Color: Antique Copper
  • 12" x 12" per sheet
  • Each individual tile are with ceramic backing for easy installation and semi-capped around the edges to cover exposed ceramic backing for edges and for use as trims.
  • Color of the tiles may vary slightly from the images shown and the specified sizes are nominal
  • The individual tiles are mounted on a high-quality glass fiber net, which significantly reduces the installation efforts and time
Maintenance

 

Clean with a damp soft cloth or soapy water and sponge if required.

Acid or corrosive solutions are not recommended.

The metal tile finishes may come loose during installation and when peeling the protective film. Few loose pieces are natural and can be stuck on again using super glue, hot glue or any other adhesives for metal.

Each batch of the Copper Antique will vary depending on the weather or more the chemical reaction, during the antique process, of individual lots of sheet copper.

Metal Tiles Specifications and Care

Blanke Aqua Shield CUT

Blanke Aqua Shield CUT

$1.85

Blanke AQUA SHIELD - Cut per order

Every feet run equal to 3.3 sq feet.

Sold by Linear ft. priced by sq. ft.

Select the total unit (sq. ft) you need and it will round it to the nearest linear run.

Blanke AQUA SHIELD is a waterproofing fabric that can be applied with thinset to most surfaces that are dry, flat and structurally sound. Tile can be installed directly on fabric without the cure time required for liquid applied products. Blanke AQUA SHIELD provides a vapor barrier that makes it ideal for steam rooms. The high tensile strength of the Blanke AQUA SHIELD ensures long lasting protection from moisture penetration in continuous wet areas such as shower stalls and bathrooms. In addition to waterproofing, the Blanke AQUA SHIELD's engineered blend of fibers also provide exceptional resistance to mold build-up; break-down from strong chemicals; and UV destabilization. A wide range of convenient accessories is available such as Blanke AQUA FLEX for taping movement joints; Blanke AQUA SA, a self-adhesive tape for quick and convenient taping of seams; and preformed corners.

Application.

Check substrate to ensure that it is dry, even and sound. Apply a setting adhesive suitable for the application to the wall or floor substrate with a 4 mm notched trowel. Apply the adhesive on an area approximately 3/8" wider than the Aqua Shield fabric. Cut the fabric to the desired length and place on the substrate in the same manner as when hanging wall paper and smooth out with a wall paper brush (Tampico brush). Use a wide flat trowel to carefully embed the fabric into the adhesive ensuring there are no air pockets. Allow at least a 1/4??? fabric overlap. The tiles can then be installed immediately onto the Aqua Shield in the normal manner. .

Installation :

1. The surface must be clean, even and load bearing. The substrate must be sufficiently free of moisture. (Use a moisture meter if unsure of moisture content).

2. Porous surfaces like concrete may have to be coated with a suitable primer.

3. General Installation Procedures: All of the detail areas, such as around plumbing pipes, wall-to-floor transitions, wall-to-wall connections (including corners), around drains and movement joints if present, must be sealed up first using convenient Blanke AQUA SHIELD accessories (pipe surrounds, preformed corners, self-adhesive tapes, etc.) After this step is completed, the wall and floor surfaces need to be sealed up using the larger rolls. The ceramic tile can then be installed immediately.

4. Detailed Installation - Plumbing Pipes: Use a 1/4" x 3/16" V - notched trowel to apply the thinset to the substrate around the pipe. Press the Blanke AQUA SHIELD SP or LP around the pipe and against the wall with a trowel. Use the trowel to scrape off excess thinset. Use Blanke AQUA SEAL water proofing adhesive to seal the edges of Blanke AQUA SHIELD SP/LP to the area around the pipe or plumbing fixture.

Metal Liner Rope Copper 5 8  x 6

Metal Liner Rope Copper 5 8 x 6

$14.00

Metal Liner Copper

5/8" x 6" Darlinghurst Liner

Price per Piece

Copper tiles are made from the solid copper - Overtime they will exhibit the natural oxidizing hues for which copper is famous.

Copper tile is not suitable for exterior usage.

Copper tile can be used for both wall and floor.

Each batch of the Copper Antique will vary depending on the weather or more the chemical reaction, during the antique process, of individual lots of sheet copper.

Maintenance

Clean with a damp soft cloth or soapy water and sponge if required.

Acid or corrosive solutions are not recommended.

Metal Tiles Specifications and Care

 

Bennelong Point Stone N Glass Dots Blend - Dark Platinum

Bennelong Point Stone N Glass Dots Blend – Dark Platinum

$44.50

Bennelong Point Series Dots - Dark Platinum

Dots - Stone & Glass Blend

Grey Foussana with Wood Texture: Platinum Matte & Polished / Nickel Matte & Polished

Piece Size: 11 1/4" x 11 3/4"
Sq. Ft. Per Sheet: .92
Backing: Mesh
Application: Backsplash, Residential, Commercial, Accent Tile

Blended Element Products

Some lines from the following series contain more than one element. The maintenance and care process should be as follows.

  • Regular cleaning with a mild bathroom cleaner or neutral stone cleaner and a soft cloth or sponge according to the manufacturer of the cleaner is recommended. Buff dry with a soft cloth.
  • Sealing prior to grouting is recommended for all stone mosaics.
  • Do not use acids, corrosive, or abrasive cleaners.
  • Do not use ammonia based cleaners on products with either Copper or Aluminum components.

Installation Tips:

  • Sealing is necessary before grouting.
  • Cut edges may allow grout to seep in, we recommend using a silicone glue or something of the like to cover the cut edge before grouting.

Glass Usage ??? Installation - Care & Maintenance

Tile Maintenance and More

Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish

Bennelong Point Stone N Glass Cube Blend - Carrara

Bennelong Point Stone N Glass Cube Blend – Carrara

$44.50

Bennelong Point Series Cube - Carrara

Cube - Stone & Glass Blend

Carrara Honed with Wood Texture: Quartz Matte / Diamond Matte

Piece Size: 10 1/2" x 12"
Sq. Ft. Per Sheet: 0.9
Backing: Mesh
Application: Backsplash, Residential, Commercial, Accent Tile

Blended Element Products

Some lines from the following series contain more than one element. The maintenance and care process should be as follows.

  • Regular cleaning with a mild bathroom cleaner or neutral stone cleaner and a soft cloth or sponge according to the manufacturer of the cleaner is recommended. Buff dry with a soft cloth.
  • Sealing prior to grouting is recommended for all stone mosaics.
  • Do not use acids, corrosive, or abrasive cleaners.
  • Do not use ammonia based cleaners on products with either Copper or Aluminum components.

Installation Tips:

  • Sealing is necessary before grouting.
  • Cut edges may allow grout to seep in, we recommend using a silicone glue or something of the like to cover the cut edge before grouting.

Glass Usage ??? Installation - Care & Maintenance

Tile Maintenance and More

Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish

 

Metal Tiles Brushed Aluminum 4 x 4

Metal Tiles Brushed Aluminum 4 x 4

$29.99

Luxury Trim - Metal Tiles Brushed Aluminum

Size - 4" x 4" x 1/8" - 1/8" Hollow cavity

Sold by pack of 11 Pieces

With today's fast paced and ever changing fashion environment, Metal Tiles are the perfect alternative to real tiles. Simple and easy to use, apply over existing tiles or directly onto the wall.

Use either a polished or a brushed finished Metal Tile or use together to create a checkerboard effect.

This beautiful Luxury trim can be used to edge a tiled area or used as a border in between tiles.

The trim is the perfect complement to your modern kitchen or bathroom.

Trims and seals provide solutions to baths and showers in both functional and decorative finishes.

How to Install

Click here for more Information

 

Blanke Permacove Base Inside Corner Connector

Blanke Permacove Base Inside Corner Connector

$4.29

Blanke Permacove Inside Corner Connector

Available For use with Permacove Base Strips 1" & 1 1/2"

  • A sanitary cove base that matches the beauty of your tile!
  • A solution for tile and stone series without sanitary cove base
  • Eliminates standing water in wall to floor grout joints
  • Ideal for restaurants, restrooms, kitchens & residential showers
  • Offers esthetic design possibilities to enhance the tile installation

Blanke PermaCove is an innovative system that forms a sanitary cove base by installing straight cut pieces of tile and stone onto a flexible extruded PVC base. No longer does a tile design have to be compromised because of the lack of a factory manufactured sanitary cove. The Blanke PermaCove is ideal for restaurants, restrooms, kitchens and public showers where hygiene codes require the prevention of standing water and bacterial growth in the wall/floor joints. It is also recommended for residential showers to prevent unsightly mildew build-up. This easy-to-install system forms to irregular floor/wall connections and is complemented by a full range of accessories.

  • A solution for those series of tile and stone without sanitary cove base.
  • Eliminates standing water in wall to floor grout joints where bacteria and unsightly mildew can grow.
  • Ideal for restaurants, restrooms, kitchens and residential showers.
  • Offers esthetic design possibilities to enhance the tile installation No need to use obtrusive metal sanitary cove substitutes.
  • Easy to install -- flexible extruded PVC base forms to the wall and accommodates irregular floors and walls.
  • A complete range of corner caps and connector accessories are available.

Function. Design. Quality.

Watch the Blanke PermaCove Video

PermaCove Installation Instructions

Blanke Permat - Single Sheets

Blanke Permat – Single Sheets

$3.19

Blanke PERMAT - 6.5 sq ft per sheet

Price per sq ft - Enter total sq ft needed - minimum order is 4 sheet (= 26 sq ft). (no minimum for walk in customer)

Permat: the deflection reducing Uncoupling Underlayment

Blanke PERMAT is an innovative uncoupling underlayment that offers all the labor saving benefits of the old plastic roll systems.
Blanke PERMAT also adds support to wood substrates thereby reducing deflection and provides greater compression and tensile strength than plastic roll products. The Blanke PERMAT is stable to walk on during installation and does not require additional curing time when installing porcelain with latex modified thinset.

  • Adds the extra substrate support for stone floor installation (max L/720 for stone vs L/360 for tile)
  • Approved for ceramic tile installation over layer of 3/4" plywood on 24" o. c. joist spacing.
  • 10 year replacement warranty against problems caused by excess deflection -- only warranty of its kind in the industry (see permat warranty for details).

Properties:

  • Superior compressive strength.
  • Strengthens wood substrates thereby reducing deflection
  • Superior tensile strength.
  • Crack isolation properties (uncoupling)
  • Superior resistance to delaminating during installation.
  • No extended cure time for latex modified thinset mortars under porcelain tile.
  • Lightweight; easy to install
  • Self-seaming panels prevent substrate movement stress form transmitting to tiled surface.

Blanke PERMAT is an innovative uncoupling underlayment that adds support to wood substrates thereby reducing deflection and provides superior compression and tensile strength when compared to plastic roll and cement board products. Installed with thinset mortar, the Blanke PERMAT panels feature a mesh overhang to connect adjacent panels thereby eliminating seams that can transmit substrate movement stress to the tiled surface.
Tile can be applied immediately after installing the Blanke PERMAT.

Installation:
Substrate must be clean, dry, flat and load bearing. Trowel a more liquid than normal mix of thinset mortar onto substrate.
Lay the Blanke PERMAT panels in a row so that the mesh overhang on the two sides of a panel cover the seams of the sides of adjacent panels without the overhang. Subsequent rows of panels should be placed so that the seams running perpendicular to the previous row are offset a minimum of 3??? from the seams running in the same direction in the previous row.
Use the flat side of a trowel or a vinyl roller to press the panel into the thinset ensuring that the fabric on the underside of the panel achieves full contact with the thinset and that there are no air bubbles.
Use the flat side of the trowel to key thinset into the voids on top of the Blanke PERMAT.
Set tile using a notch trowel appropriate for the type of tile and traffic. (Read Blanke PERMAT Installation Instruction prior to installing this product).
Movement joints are required in the tile surface per industry standards.

Typical Applications:
Blanke PERMAT is an ideal alternative to backer board underlayment used in interior residential applications over wood substrates where excess deflection may be an issue and in commercial applications on concrete where stress cracks can be a problem.
Blanke PERMAT is ideally suited for new home construction where demanding installation schedules cause traffic to cross on the underlayment prior to tile installation

Suitable Substrates:
Wood substrates ??? stone and tile (including large format) Plywood EGP and OSB
16??? o.c. joist spacing, minimum subfloor thickness: 5/8???
19.2??? o.c. joist spacing, minimum subfloor thickness: 3/4???
Wood substrates ??? tile only (no larger than16???x16???) 24" o.c. joist spacing, minimum subfloor thickness: 3/4" (subject to maximum joist span restrictions)
Concrete substrates
Substrates covered with stone, tile and vinyl (consult thinset manufacturer instructions) Floor heating systems (consult Blanke installation instructions)

Technical Data:
Top Mesh: Extruded twisted strands of highly alkali resistant glass fiber, heat welded to the lower layer of HDPE mesh.
Bottom Mesh: Extruded twisted strands of alkali resistant high-density polyethylene (HDPE).

Fabric material: Polypropylene fleece
Thickness: approx. 3.3 mm (nominal 1/8 inch)
Weight: approx. 0.8 kg/m2 (approx. 2.6 ounces/sq. ft): 1.06 lbs. per - panel: 31.8 lbs. per carton
Color: Fabric: white HDPE Mesh: light-blue Top Mesh: dark blue

Watch the Blanke Permat Video

All about Blanke PerMat

How to Install Blanke PerMat

Blanke PERMAT 5 Year Limited Warranty

 

Blanke Permacove Base Strips Straight Connector

Blanke Permacove Base Strips Straight Connector

$4.29

Blanke Permacove Strips Straight Connector

Available For use with Permacove Base Strips 1" & 1 1/2"

  • A sanitary cove base that matches the beauty of your tile!
  • A solution for tile and stone series without sanitary cove base
  • Eliminates standing water in wall to floor grout joints
  • Ideal for restaurants, restrooms, kitchens & residential showers
  • Offers esthetic design possibilities to enhance the tile installation

Blanke PermaCove is an innovative system that forms a sanitary cove base by installing straight cut pieces of tile and stone onto a flexible extruded PVC base. No longer does a tile design have to be compromised because of the lack of a factory manufactured sanitary cove. The Blanke PermaCove is ideal for restaurants, restrooms, kitchens and public showers where hygiene codes require the prevention of standing water and bacterial growth in the wall/floor joints. It is also recommended for residential showers to prevent unsightly mildew build-up. This easy-to-install system forms to irregular floor/wall connections and is complemented by a full range of accessories.

  • A solution for those series of tile and stone without sanitary cove base.
  • Eliminates standing water in wall to floor grout joints where bacteria and unsightly mildew can grow.
  • Ideal for restaurants, restrooms, kitchens and residential showers.
  • Offers esthetic design possibilities to enhance the tile installation No need to use obtrusive metal sanitary cove substitutes.
  • Easy to install -- flexible extruded PVC base forms to the wall and accommodates irregular floors and walls.
  • A complete range of corner caps and connector accessories are available.

Function. Design. Quality.

Watch the Blanke PermaCove Video

PermaCove Installation Instructions

Bennelong Point Stone N Glass Dots Blend - Opal

Bennelong Point Stone N Glass Dots Blend – Opal

$44.50

Bennelong Point Series Dots - Opal

Dots - Stone & Glass Blend

Thala Grey with Wood Texture: Opal Matte & Polished / Pewter Matte & Polished

Piece Size: 11 1/4" x 11 3/4"
Sq. Ft. Per Sheet: .92
Backing: Mesh
Application: Backsplash, Residential, Commercial, Accent Tile

Blended Element Products

Some lines from the following series contain more than one element. The maintenance and care process should be as follows.

  • Regular cleaning with a mild bathroom cleaner or neutral stone cleaner and a soft cloth or sponge according to the manufacturer of the cleaner is recommended. Buff dry with a soft cloth.
  • Sealing prior to grouting is recommended for all stone mosaics.
  • Do not use acids, corrosive, or abrasive cleaners.
  • Do not use ammonia based cleaners on products with either Copper or Aluminum components.

Installation Tips:

  • Sealing is necessary before grouting.
  • Cut edges may allow grout to seep in, we recommend using a silicone glue or something of the like to cover the cut edge before grouting.

Glass Usage ??? Installation - Care & Maintenance

Tile Maintenance and More

Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish

Blanke Aqua Shield SP

Blanke Aqua Shield SP

$2.99

Blanke AQUA SHIELD - SP

Diameter of hole = 13/15"

Length 4" x 4"

Blanke AQUA SHIELD is a waterproofing fabric that can be applied with thinset to most surfaces that are dry, flat and structurally sound. Tile can be installed directly on fabric without the cure time required for liquid applied products. Blanke AQUA SHIELD provides a vapor barrier that makes it ideal for steam rooms. The high tensile strength of the Blanke AQUA SHIELD ensures long lasting protection from moisture penetration in continuous wet areas such as shower stalls and bathrooms. In addition to waterproofing, the Blanke AQUA SHIELD engineered blend of fibers also provide exceptional resistance to mold build-up; break-down from strong chemicals; and UV destabilization. A wide range of convenient accessories is available such as Blanke AQUA FLEX for taping movement joints; Blanke AQUA SA, a self-adhesive tape for quick and convenient taping of seams; and preformed corners.

Application.

Check substrate to ensure that it is dry, even and sound. Apply a setting adhesive suitable for the application to the wall or floor substrate with a 4 mm notched trowel. Apply the adhesive on an area approximately 3/8" wider than the Aqua Shield fabric. Cut the fabric to the desired length and place on the substrate in the same manner as when hanging wall paper and smooth out with a wall paper brush (tampico brush). Use a wide flat trowel to carefully embed the fabric into the adhesive ensuring there are no air pockets. Allow at least a 1/4" fabric overlap. The tiles can then be installed immediately onto the Aqua Shield in the normal manner. .

Installation:

1. The surface must be clean, even and load bearing. The substrate must be sufficiently free of moisture. (Use a moisture meter if unsure of moisture content).

2. Porous surfaces like concrete may have to be coated with a suitable primer.

3. General Installation Procedures: All of the detail areas, such as around plumbing pipes, wall-to-floor transitions, wall-to-wall connections (including corners), around drains and movement joints if present, must be sealed up first using convenient Blanke AQUA SHIELD accessories (pipe surrounds, preformed corners, self-adhesive tapes, etc.) After this step is completed, the wall and floor surfaces need to be sealed up using the larger rolls. The ceramic tile can then be installed immediately.

4. Detailed Installation - Plumbing Pipes: Use a 1/4" x 3/16" V - notched trowel to apply the thinset to the substrate around the pipe. Press the Blanke AQUA SHIELD SP or LP around the pipe and against the wall with a trowel. Use the trowel to scrape off excess thinset. Use Blanke AQUA SEAL water proofing adhesive to seal the edges of Blanke AQUA SHIELD SP/LP to the area around the pipe or plumbing fixture.

Metal Tile Oil Rubbed Bronze Rope Darlinghurst A8104

Metal Tile Oil Rubbed Bronze Rope Darlinghurst A8104

$14.90

Darlinghurst Composite Metal tile Oil Rubbed Bronze

Price per Piece

Rope small

Size - 1/2" x 6"

Our metals are the jewelry of the room. Rope Listellos, Liners, Frames, Wall strip-all individually cast and finished.

Our Sculptured Metal collection is made up of the building blocks of the world???s greatest cities and monuments ??? Oil Rub Bronze and Rust metal tile and trim . These illustrious alloys have glistened in many forms over the years. And are now cast elegantly for home decoration. Handsomely finished, Sculptured Metal adorns interior walls and vertical surface areas with ageless appeal.

The rustic sophisticated lines of sculptured rust adapt to both contemporary and classic look, Bronze evokes a feeling of timelessness and splendor.

Add further dimension and contrast by using metal liner as a distinctive border, or give dramatic flair to a slate pattern by integrating it into the design

What is Composite Metal?

Metal Flakes, Ceramic Flakes, Polymer, all poured into mould 20 - 30,minute later it is set up & popped out of the mold

This is not a fired product, keep away apex 10??? from fire place, oven, etc..

 

Bologna Black Stainless Steel Brushed 1 X 4

Bologna Black Stainless Steel Brushed 1 X 4

$62.95

Bologna Black Stainless Steel Brushed - 1 1/4" x 4"

Murray River Metal Series

This product is made with sheets of stainless steel wrapped over a ceramic base. The black color is made using an anodizing process. The brushed texture gives the appearance of different shades and adds to the character of the product.

Material: Stainless Steel Grade 304 and Ceramic
Sheet Size: 11 1/4" x 11 1/4"
Piece Size: 1 1/4" x 4"
Thickness: 3/8"
Color: Black Stainless Steel
Finish: Brushed
Backing: Mesh

Another great design option available for wall trims backsplashes around countertops in kitchen and bath areas, or for any other design projects. Ceramic backing makes theses tiles sturdy enough for wall application and the mesh backing allows for easy handling when tiling around various surfaces.

The individual squares are antique copper tiles, featuring a rich patina finish that brings warmth and luxury to any room. These look amazing whether used by themselves, or as accents to enhance any tile project.

Installation Tips:

  • Epoxy grouts and pre-mixed grouts are not recommended with copper or colored stainless steel because they can chemically damage the surface. The same reaction can also stain the grout.
  • Keep this product more than six inches away from an open flame. Areas of concern would be steam rooms, fireplace surrounds, and back splashes behind cook tops.

Copper tile is not suitable for exterior usage.

Copper tile can be used for both wall and floor.

Features:

  • Color: Antique Copper
  • 12" x 12" per sheet
  • Each individual tile are with ceramic backing for easy installation and semi-capped around the edges to cover exposed ceramic backing for edges and for use as trims.
  • Color of the tiles may vary slightly from the images shown and the specified sizes are nominal
  • The individual tiles are mounted on a high-quality glass fiber net, which significantly reduces the installation efforts and time
Maintenance

 

Clean with a damp soft cloth or soapy water and sponge if required.

Acid or corrosive solutions are not recommended.

The metal tile finishes may come loose during installation and when peeling the protective film. Few loose pieces are natural and can be stuck on again using super glue, hot glue or any other adhesives for metal.

Each batch of the Copper Antique will vary depending on the weather or more the chemical reaction, during the antique process, of individual lots of sheet copper.

Metal Tiles Specifications and Care

Bologna Stainless Steel Brushed - 1  x 4

Bologna Stainless Steel Brushed – 1 x 4

$59.99

Bologna Stainless Steel Brushed - 1 1/4" x 4"

Murray River Metal Series

This product is made with sheets of stainless steel wrapped over a ceramic base. The black color is made using an anodizing process. The brushed texture gives the appearance of different shades and adds to the character of the product.

Material: Stainless Steel Grade 304 and Ceramic
Sheet Size: 11 1/4" x 11 1/4"
Piece Size: 1 1/4" x 4"
Thickness: 3/8"
Color: Stainless Steel
Finish: Brushed
Backing: Mesh

Another great design option available for wall trims backsplashes around countertops in kitchen and bath areas, or for any other design projects. Ceramic backing makes theses tiles sturdy enough for wall application and the mesh backing allows for easy handling when tiling around various surfaces.

The individual squares are antique copper tiles, featuring a rich patina finish that brings warmth and luxury to any room. These look amazing whether used by themselves, or as accents to enhance any tile project.

Installation Tips:

  • Epoxy grouts and pre-mixed grouts are not recommended with copper or colored stainless steel because they can chemically damage the surface. The same reaction can also stain the grout.
  • Keep this product more than six inches away from an open flame. Areas of concern would be steam rooms, fireplace surrounds, and back splashes behind cook tops.

Copper tile is not suitable for exterior usage.

Copper tile can be used for both wall and floor.

Features:

  • Color: Antique Copper
  • 12" x 12" per sheet
  • Each individual tile are with ceramic backing for easy installation and semi-capped around the edges to cover exposed ceramic backing for edges and for use as trims.
  • Color of the tiles may vary slightly from the images shown and the specified sizes are nominal
  • The individual tiles are mounted on a high-quality glass fiber net, which significantly reduces the installation efforts and time
Maintenance

 

Clean with a damp soft cloth or soapy water and sponge if required.

Acid or corrosive solutions are not recommended.

The metal tile finishes may come loose during installation and when peeling the protective film. Few loose pieces are natural and can be stuck on again using super glue, hot glue or any other adhesives for metal.

Each batch of the Copper Antique will vary depending on the weather or more the chemical reaction, during the antique process, of individual lots of sheet copper.

Metal Tiles Specifications and Care

 

Copyright © 2022 AMAST. All rights reserved.

Submit you post here.

Please be patient after posting, because your article must be reviewd by one of our editors.
Thank you!

Please complete the required fields.
Please select your image(s) to upload.