Blanke AQUA SHIELD - 5 inch - CUT PER ORDER This product sold by linear run. Blanke AQUA SHIELD is a waterproofing fabric that can be applied with thinset to most surfaces that are dry, flat and structurally sound. Tile can be installed directly on fabric without the cure time required for liquid applied products. Blanke AQUA SHIELD provides a vapor barrier that makes it ideal for steam rooms. The high tensile strength of the Blanke AQUA SHIELD ensures long lasting protection from moisture penetration in continuous wet areas such as shower stalls and bathrooms. In addition to waterproofing, the Blanke AQUA SHIELD engineered blend of fibers also provide exceptional resistance to mold build-up; break-down from strong chemicals; and UV destabilization. A wide range of convenient accessories is available such as Blanke AQUA FLEX for taping movement joints; Blanke AQUA SA, a self-adhesive tape for quick and convenient taping of seams; and preformed corners. Application. Check substrate to ensure that it is dry, even and sound. Apply a setting adhesive suitable for the application to the wall or floor substrate with a 4 mm notched trowel. Apply the adhesive on an area approximately 3/8" wider than the Aqua Shield fabric. Cut the fabric to the desired length and place on the substrate in the same manner as when hanging wall paper and smooth out with a wall paper brush (tampico brush). Use a wide flat trowel to carefully embed the fabric into the adhesive ensuring there are no air pockets. Allow at least a 1/4" fabric overlap. The tiles can then be installed immediately onto the Aqua Shield in the normal manner. . Installation: 1. The surface must be clean, even and load bearing. The substrate must be sufficiently free of moisture. (Use a moisture meter if unsure of moisture content). 2. Porous surfaces like concrete may have to be coated with a suitable primer. 3. General Installation Procedures: All of the detail areas, such as around plumbing pipes, wall-to-floor transitions, wall-to-wall connections (including corners), around drains and movement joints if present, must be sealed up first using convenient Blanke AQUA SHIELD accessories (pipe surrounds, preformed corners, self-adhesive tapes, etc.) After this step is completed, the wall and floor surfaces need to be sealed up using the larger rolls. The ceramic tile can then be installed immediately. 4. Detailed Installation - Plumbing Pipes: Use a 1/4" x 3/16" V - notched trowel to apply the thinset to the substrate around the pipe. Press the Blanke AQUA SHIELD SP or LP around the pipe and against the wall with a trowel. Use the trowel to scrape off excess thinset. Use Blanke AQUA SEAL water proofing adhesive to seal the edges of Blanke AQUA SHIELD SP/LP to the area around the pipe or plumbing fixture.

Bennelong Point Series Dots - Dark Platinum Dots - Stone & Glass Blend Grey Foussana with Wood Texture: Platinum Matte & Polished / Nickel Matte & Polished Piece Size: 11 1/4" x 11 3/4" Sq. Ft. Per Sheet: .92 Backing: Mesh Application: Backsplash, Residential, Commercial, Accent Tile Blended Element Products Some lines from the following series contain more than one element. The maintenance and care process should be as follows. Regular cleaning with a mild bathroom cleaner or neutral stone cleaner and a soft cloth or sponge according to the manufacturer of the cleaner is recommended. Buff dry with a soft cloth. Sealing prior to grouting is recommended for all stone mosaics. Do not use acids, corrosive, or abrasive cleaners. Do not use ammonia based cleaners on products with either Copper or Aluminum components. Installation Tips: Sealing is necessary before grouting. Cut edges may allow grout to seep in, we recommend using a silicone glue or something of the like to cover the cut edge before grouting. Glass Usage ??? Installation - Care & Maintenance Tile Maintenance and More Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish

Blanke AQUA SHIELD - Cut per order Every feet run equal to 3.3 sq feet. Sold by Linear ft. priced by sq. ft. Select the total unit (sq. ft) you need and it will round it to the nearest linear run. Blanke AQUA SHIELD is a waterproofing fabric that can be applied with thinset to most surfaces that are dry, flat and structurally sound. Tile can be installed directly on fabric without the cure time required for liquid applied products. Blanke AQUA SHIELD provides a vapor barrier that makes it ideal for steam rooms. The high tensile strength of the Blanke AQUA SHIELD ensures long lasting protection from moisture penetration in continuous wet areas such as shower stalls and bathrooms. In addition to waterproofing, the Blanke AQUA SHIELD's engineered blend of fibers also provide exceptional resistance to mold build-up; break-down from strong chemicals; and UV destabilization. A wide range of convenient accessories is available such as Blanke AQUA FLEX for taping movement joints; Blanke AQUA SA, a self-adhesive tape for quick and convenient taping of seams; and preformed corners. Application. Check substrate to ensure that it is dry, even and sound. Apply a setting adhesive suitable for the application to the wall or floor substrate with a 4 mm notched trowel. Apply the adhesive on an area approximately 3/8" wider than the Aqua Shield fabric. Cut the fabric to the desired length and place on the substrate in the same manner as when hanging wall paper and smooth out with a wall paper brush (Tampico brush). Use a wide flat trowel to carefully embed the fabric into the adhesive ensuring there are no air pockets. Allow at least a 1/4??? fabric overlap. The tiles can then be installed immediately onto the Aqua Shield in the normal manner. . Installation : 1. The surface must be clean, even and load bearing. The substrate must be sufficiently free of moisture. (Use a moisture meter if unsure of moisture content). 2. Porous surfaces like concrete may have to be coated with a suitable primer. 3. General Installation Procedures: All of the detail areas, such as around plumbing pipes, wall-to-floor transitions, wall-to-wall connections (including corners), around drains and movement joints if present, must be sealed up first using convenient Blanke AQUA SHIELD accessories (pipe surrounds, preformed corners, self-adhesive tapes, etc.) After this step is completed, the wall and floor surfaces need to be sealed up using the larger rolls. The ceramic tile can then be installed immediately. 4. Detailed Installation - Plumbing Pipes: Use a 1/4" x 3/16" V - notched trowel to apply the thinset to the substrate around the pipe. Press the Blanke AQUA SHIELD SP or LP around the pipe and against the wall with a trowel. Use the trowel to scrape off excess thinset. Use Blanke AQUA SEAL water proofing adhesive to seal the edges of Blanke AQUA SHIELD SP/LP to the area around the pipe or plumbing fixture.

Bennelong Point Series Cube - Carrara Cube - Stone & Glass Blend Carrara Honed with Wood Texture: Quartz Matte / Diamond Matte Piece Size: 10 1/2" x 12" Sq. Ft. Per Sheet: 0.9 Backing: Mesh Application: Backsplash, Residential, Commercial, Accent Tile Blended Element Products Some lines from the following series contain more than one element. The maintenance and care process should be as follows. Regular cleaning with a mild bathroom cleaner or neutral stone cleaner and a soft cloth or sponge according to the manufacturer of the cleaner is recommended. Buff dry with a soft cloth. Sealing prior to grouting is recommended for all stone mosaics. Do not use acids, corrosive, or abrasive cleaners. Do not use ammonia based cleaners on products with either Copper or Aluminum components. Installation Tips: Sealing is necessary before grouting. Cut edges may allow grout to seep in, we recommend using a silicone glue or something of the like to cover the cut edge before grouting. Glass Usage ??? Installation - Care & Maintenance Tile Maintenance and More Colors may vary from picture, Product may have chips, pitting and other characteristics, Pictures are only an indication of color, texture and finish  

Composite Metal tile Oil Rubbed Bronze Sydney Harbor Metals Series Price per Piece Ranwik Insert Size - 1" x 1" Our metals are the jewelry of the room. Rope Listellos, Liners, Frames, Wall strip-all individually cast and finished. Our Sculptured Metal collection is made up of the building blocks of the world???s greatest cities and monuments ??? Oil Rub Bronze and Rust metal tile and trim . These illustrious alloys have glistened in many forms over the years. And are now cast elegantly for home decoration. Handsomely finished, Sculptured Metal adorns interior walls and vertical surface areas with ageless appeal. The rustic sophisticated lines of sculptured rust adapt to both contemporary and classic look, Bronze evokes a feeling of timelessness and splendor. Add further dimension and contrast by using metal liner as a distinctive border, or give dramatic flair to a slate pattern by integrating it into the design What is Composite Metal? Metal Flakes, Ceramic Flakes, Polymer, all poured into mould 20 - 30,minute later it is set up & popped out of the mold This is not a fired product, keep away apex 10??? from fire place, oven, etc..  

Copper Antique Metal Tile 2 x 2 Murray River Metal Series This product is made with sheets of solid copper wrapped over a ceramic base. Through oxidization, all copper will patina over time giving it an old world look. Material: Metal Sheet Size: 11 1/4" x 11 1/4" Piece Size: 2" x 2" Thickness: 3/8" (8mm) Color: Antique Copper Finish: Antique Backing: Mesh Copper tiles are made from the solid copper - Overtime they will exhibit the natural oxidizing hues for which copper is famous. The possibilities are endless with Antique Copper Tiles! Another great design option available for wall trims backsplashes around countertops in kitchen and bath areas, or for any other design projects. Ceramic backing makes theses tiles sturdy enough for wall application and the mesh backing allows for easy handling when tiling around various surfaces. The individual squares are antique copper tiles, featuring a rich patina finish that brings warmth and luxury to any room. These look amazing whether used by themselves, or as accents to enhance any tile project. Installation Tips: Epoxy grouts and pre-mixed grouts are not recommended with copper or colored stainless steel because they can chemically damage the surface. The same reaction can also stain the grout. Keep this product more than six inches away from an open flame. Areas of concern would be steam rooms, fireplace surrounds, and back splashes behind cook tops. Copper tile is not suitable for exterior usage. Copper tile can be used for both wall and floor. Features: Color: Antique Copper 12" x 12" per sheet Each individual tile are with ceramic backing for easy installation and semi-capped around the edges to cover exposed ceramic backing for edges and for use as trims. Color of the tiles may vary slightly from the images shown and the specified sizes are nominal The individual tiles are mounted on a high-quality glass fiber net, which significantly reduces the installation efforts and time Maintenance   Clean with a damp soft cloth or soapy water and sponge if required. Acid or corrosive solutions are not recommended. The metal tile finishes may come loose during installation and when peeling the protective film. Few loose pieces are natural and can be stuck on again using super glue, hot glue or any other adhesives for metal. Each batch of the Copper Antique will vary depending on the weather or more the chemical reaction, during the antique process, of individual lots of sheet copper. Metal Tiles Specifications and Care  

Blanke PermaCove Base Strips 8 ft long Available 1 1/2" at 8 feet long and 1" in 4 ft A sanitary cove base that matches the beauty of your tile! A solution for tile and stone series without sanitary cove base Eliminates standing water in wall to floor grout joints Ideal for restaurants, restrooms, kitchens & residential showers Offers esthetic design possibilities to enhance the tile installation Blanke PermaCove is an innovative system that forms a sanitary cove base by installing straight cut pieces of tile and stone onto a flexible extruded PVC base. No longer does a tile design have to be compromised because of the lack of a factory manufactured sanitary cove. The Blanke PermaCove is ideal for restaurants, restrooms, kitchens and public showers where hygiene codes require the prevention of standing water and bacterial growth in the wall/floor joints. It is also recommended for residential showers to prevent unsightly mildew build-up. This easy-to-install system forms to irregular floor/wall connections and is complemented by a full range of accessories. Advantages A solution for those series of tile and stone without sanitary cove base. Eliminates standing water in wall to floor grout joints where bacteria and unsightly mildew can grow. Ideal for restaurants, restrooms, kitchens and residential showers. Offers esthetic design possibilities to enhance the tile installation No need to use obtrusive metal sanitary cove substitutes. Easy to install -- flexible extruded PVC base forms to the wall and accommodates irregular floors and walls. A complete range of corner caps and connector accessories are available. Function. Design. Quality. Watch the Blanke PermaCove Video PermaCove Installation Instructions  

Copper Antique Metal Tile 1 x 1 Murray River Metal Series This product is made with sheets of solid copper wrapped over a ceramic base. Through oxidization, all copper will patina over time giving it an old world look. Material: Metal Sheet Size: 11 1/4" x 11 1/4" Piece Size: 1" x 1" Thickness: 3/8" Color: Antique Copper Finish: Antique Backing: Mesh Copper tiles are made from the solid copper - Overtime they will exhibit the natural oxidizing hues for which copper is famous. The possibilities are endless with Antique Copper Tiles! Another great design option available for wall trims backsplashes around countertops in kitchen and bath areas, or for any other design projects. Ceramic backing makes theses tiles sturdy enough for wall application and the mesh backing allows for easy handling when tiling around various surfaces. The individual squares are antique copper tiles, featuring a rich patina finish that brings warmth and luxury to any room. These look amazing whether used by themselves, or as accents to enhance any tile project. Installation Tips: Epoxy grouts and pre-mixed grouts are not recommended with copper or colored stainless steel because they can chemically damage the surface. The same reaction can also stain the grout. Keep this product more than six inches away from an open flame. Areas of concern would be steam rooms, fireplace surrounds, and back splashes behind cook tops. Copper tile is not suitable for exterior usage. Copper tile can be used for both wall and floor. Features: Color: Antique Copper 121 individual tiles per sheet Individual tile dimension: 25cm x 25cm (approx. 1??? x 1???), 8mm thick (3/8???) 12" x 12" per sheet Each individual tile are with ceramic backing for easy installation and semi-capped around the edges to cover exposed ceramic backing for edges and for use as trims. Color of the tiles may vary slightly from the images shown and the specified sizes are nominal The individual tiles are mounted on a high-quality glass fiber net, which significantly reduces the installation efforts and time Maintenance   Clean with a damp soft cloth or soapy water and sponge if required. Acid or corrosive solutions are not recommended. The metal tile finishes may come loose during installation and when peeling the protective film. Few loose pieces are natural and can be stuck on again using super glue, hot glue or any other adhesives for metal. Each batch of the Copper Antique will vary depending on the weather or more the chemical reaction, during the antique process, of individual lots of sheet copper. Metal Tiles Specifications and Care