SunTouch Electric Radiant WarmWire Spool 160 Sq. Ft. *Coverage Area: 135 - 160 - 192 Sq. Ft. Wire Length - 626 Linear Feet This size is available in 240VAC Only Alternate pricing available - Contact us for pricing Toll free 877 880 8453 or Email contact@flooringsupplyshop.com Also Available in 120VAC WarmWire Features: ??? Single point connection ??? High-performance ETFE insulation ??? Strengthened with armed reinforcing ??? Protected with stainless steel jacket ??? Sizes up to 240 sq. ft. ??? UL listed in Canada & USA ??? Ultra-low EMF ??? Grounded from end to end 244-8 Cares about the safety of your love one? CLICK HERE to See SunTouch EMF SunTouch WarmWire Kits are used to make floor warm and provide years of lasting comfort. The floor warming system keeps the bathrooms, kitchens and entry ways dry and warm. The heated floor system is an affordable alternative to radiant heated mats. These are used for making small as well as large rooms up to 240 sq. ft. warm and cozy, with multiple cables wired in parallel. 2.5" o.c. delivers 15 Watts per sq. ft. - Concrete basement slabs, sunrooms, high heat loss areas, etc. 3" o.c. delivers 12 Watts per sq. ft. - Bathrooms, kitchens, dining/living areas, etc. 3.5" o.c. delivers 10 Watts per sq. ft. - Hallways, entries, low heat loss areas, etc. *The 3" spacing is most commonly used. WarmWire can be used to warm areas as small as a powder room or as large as 240 sq. ft. Even larger areas can be warmed with multiple cables wired in parallel. SunTouch WarmWire Installation Guidelines Click here for How to Estimate and Order WarmWire  

SunTouch Radiant WarmWire Spool 45 sq. ft Only at flooringsupplyshop.com Suntouch Low Price Guarantee Alternate pricing available - Contact us for pricing. *Coverage Area: 36 - 45 - 54 Sq. Ft. Wire Length - 176 Linear Feet This size available in 120 Volt Only WarmWire Features: ??? Single point connection ??? High-performance ETFE insulation ??? Strengthened with aramid reinforcing ??? Protected with stainless steel jacket ??? Sizes up to 240 sq. ft. ??? UL listed in Canada & USA ??? Ultra-low EMF ??? Grounded from end to end 244-8 WarmWire??? floor heating cable is an economical way to utilize a radiant heat flooring system as a means of warming floors and providing years of lasting comfort. This floor warming system offers underfloor heat that helps keep bathrooms, kitchens, and entry ways dry and safe. Make your home cozy with a SunTouch heated floor system. Some of the features of WarmWire Spool are: Exceed CSA-130 New urethane outer jacket Stainless steel braid shines through 2.5" o.c. delivers 15 Watts per Sq. Ft. in concrete basement slabs, sun rooms and high heat loss areas 3" o.c. delivers 12 Watts per Sq. Ft. in bathrooms, kitchens, dining and living areas 3.5" o.c. delivers 10 Watts per Sq. Ft. in hallways, entries and low heat loss areas *The 3" spacing is most commonly used. The WarmWire??? floor heating Spool are easy to install by securing the cable straps to the subfloor and stretching the wire between them. Moreover, these are covered with thinset or self leveling mortar, which make these suitable for almost any floor covering. WarmWire can be used to warm areas as small as a powder room or as large as 240 sq. ft. Even larger areas can be warmed with multiple cables wired in parallel. Click here for SunTouch VIDEO Library SunTouch WarmWire Installation Guidelines Click here for How to Estimate and Order WarmWire  

SunTouch WarmWire Kits - 42 to 60 sq. ft. Alternate pricing available - Contact us for pricing. Toll free 877 880 8453 or Email contact@flooringsupplyshop.com Cares abut the safety of your love one? CLICK HERE to See SunTouch EMF Complete Installation Kit - 240V Wire Length - 196 Linear Feet = 50* sq. ft. Kit Includes: WarmWire Spool/s SunStat Command Programmable Thermostat 500850 120/240V WarmWire Strap 1 (1 for every 40 sq. ft.) Loudmouth Installation Monitor Double Sided Tape Installation Manual Coverage Area & Spec Sq. Ft @ 2.5" O.C. Sq. Ft @ 3" O.C. Sq. Ft @ 3.5" O.C. Amperage Draw Resistance (ohms) 42 50 60 2.5 83-102 2.5" o.c. delivers 15 Watts per sq. ft. - Concrete basement slabs, sunrooms, high heat loss areas, etc. 3" o.c. delivers 12 Watts per sq. ft. - Bathrooms, kitchens, dining/living areas, etc. 3.5" o.c. delivers 10 Watts per sq. ft. - Hallways, entries, low heat loss areas, etc. * The 3" spacing is most commonly used. The affordable alternative to radiant heated mats. WarmWire Features * Single point connection * High-performance ETFE insulation * Strengthened with armed reinforcing * Protected with stainless steel jacket * Available in 120VAC and 240VAC * Sizes up to 240 sq. ft. * UL listed in Canada & USA * Ultra-low EMF * Grounded from end to end 244-8 WarmWire floor heating cable is an economical way to utilize a radiant heat flooring system as a means of warming floors and providing years of lasting comfort. This floor warming system offers UnderFloor heat that helps keep bathrooms, kitchens, and entry ways dry and safe. Make your home cozy with a SunTouch heated floor system. The material cost for an average 30 - 40 sq. ft. WarmWire radiant flooring is less than $500 with an operational cost roughly the same as two 60 watt light bulbs. WarmWire can be used to warm areas as small as a powder room or as large as 240 sq. ft. Even larger areas can be warmed with multiple cables wired in parallel. SunTouch WarmWire Installation Guidelines Click here for How to Estimate and Order WarmWire  

SunTouch Radiant WarmWire Kits - 126 to 180 sq. ft. Alternate pricing available - Contact us for pricing. Toll free 877 880 8453 or Email contact@flooringsupplyshop.com Cares about the safety of your love one? CLICK HERE to See SunTouch EMF Complete Installation Kit Wire Length - 587 Linear Feet - 2 Spools total of 150 sq, Ft Kit Includes: WarmWire Spool/s SunStat Command Programmable Thermostat 500850 120/240V WarmWire Strap 1 (1 for every 40 sq. ft.) Loudmouth Installation Monitor Double Sided Tape Installation Manual Coverage Area & Spec Sq. Ft @ 2.5" O.C. Sq. Ft @ 3" O.C. Sq. Ft @ 35" O.C. Amperage Draw 126 150 180 15.0 2.5" o.c. delivers 15 Watts per sq. ft. - Concrete basement slabs, sunrooms, high heat loss areas, etc. 3" o.c. delivers 12 Watts per sq. ft. - Bathrooms, kitchens, dining/living areas, etc. 3.5" o.c. delivers 10 Watts per sq. ft. - Hallways, entries, low heat loss areas, etc. * The 3 " spacing is most commonly used. The affordable alternative to radiant heated mats. WarmWire Features * Single point connection * High-performance ETFE insulation * Strengthened with armed reinforcing * Protected with stainless steel jacket * Available in 120VAC and 240VAC * Sizes up to 240 sq. ft. * UL listed in Canada & USA * Ultra-low EMF * Grounded from end to end 244-8 WarmWire floor heating cable is an economical way to utilize a radiant heat flooring system as a means of warming floors and providing years of lasting comfort. This floor warming system offers UnderFloor heat that helps keep bathrooms, kitchens, and entry ways dry and safe. Make your home cozy with a SunTouch heated floor system. The material cost for an average 30 - 40 sq. ft. WarmWire radiant flooring is less than $500 with an operational cost roughly the same as two 60 watt light bulbs. WarmWire can be used to warm areas as small as a powder room or as large as 240 sq. ft. Even larger areas can be warmed with multiple cables wired in parallel. SunTouch WarmWire Installation Guidelines Click here for How to Estimate and Order WarmWire    

EasyHeat Radiant Warm Tiles Elite 12 sq ft THE BEST FLOORS DESERVE IT In Stock Ship Same Day 12 Sq. Ft - 72" x 24" 120 Volt 1.5 Amps - 240 Volt 0.8 Amps The Warm Tiles Elite indoor floor warming system delivers the ultimate comfort for your finest residential and commercial flooring. It features a super thin (0.125"/3.2 mm) heating mat that causes minimal impact on floor height. Mats consist of heating cable interwoven into slim, durable fabric designed to efficiently warm the floor to a comfortable temperature. EasyHeat products have extremely low EMF and such levels are comparable to standard household products such as televisions, mobile phones and refrigerators Features Super thin - only 0.125 in (3.2 mm) thick Easier and quicker to install than conventional floor warming mats Energy efficient Up to 15 watts per square foot (up to 160 watts per square meter) heat output Can be used for a variety of applications and floor surfaces Variety of sizes and configurations CSA and UL approved Heating cables interwoven into mat and ready for installation Only at flooringsupplyshop.com Lowest Price Guaranteed on EasyHeat flooring systems For radiant floor heating systems, EasyHeat has designed a super thin floor mats that warm stone and tile floors. EasyHeat Heating Mats are suitable for installation in bathrooms, kitchens, entries, sunrooms and more. Applications 120 Vac and 240 Vac for standard and custom mats Indoor environments Floor thermostat recommended, such as programmable or non-programmable models by EasyHeat Surface preparation and installation should be conducted in accordance with local Electrical and Building Code Finished floor should be installed according to the Tile Council of America for installation in the United States, or the Terrazzo, Tile and Marble Association of Canada for Canadian installation Warm Tiles Elite Mats are designed for today's most popular floors, including: Easy Heat Elite Installation Instruction FGS Programmable Thermostat Installation Instruction Toll free 877 880 8453 or Email contact@flooringsupplyshop.com  

SunTouch ProMelt Snow Melting Cables 35 - 46 Multiply spool can be combined to cover larger areas Specifications: Coverage: 34 to 46 sq. ft Amp Draw - 8.4 Spool Length - 138 feet Voltage: 208 Volt Ohms: 23 - 29 3" o.c 50 watt sq 14 sq ft - Coverage 4" o.c 38 watt sq 19 sq ft- Coverage Snow melting cable on a spool. Perfect for complex or divided shapes and large areas. SunTouch ProMelt products are a simple way to eliminate snow and ice from stair way, drive way, entry way and more. ProMelt Cable is a complete heating cable consisting of a series resistance heating cable and a single power lead for easy single-point connection. The heating cable length cannot be cut to fit. Fast and easy snow removal. ProMelt is designed for small to medium sized projects for your residence or commercial building. Contractors love it because it???s simple and goes in quickly. Home Owners love snow-free surfaces and the lower installed cost. Prevent accidents Reduce slips & falls on steps & walkways. Reduce "tracked-in" ice, snow & water. Reduce auto accidents. Prevent damage Avoid salt damage to cars, floors & plants. Protect textured surfaces from snowplows. Protect landscaping from snowplows. A tough product for a tough job. ProMelt heating cables are built to last. They're made with low-oxygen copper elements covered with high-temperature ETFE insulation, a braided copper ground shield, and a super-tough polyurethane outer jacket for jobsite extremes. ProMelt is well-suited in commercial and residential applications where first cost is important and mechanical rooms are small. Follow these recommendations when selecting ProMelt Cables: 1. Determine what voltage will be used: 120VAC, 208VAC, 240VAC, or 277VAC. 2. Determine the heat output. The climate and amount of snowfall will dictate this choice. In general, most systems will require 50 Watts/Sq. Ft. spacing to melt snow and ice. Some residential or light commercial systems in temperate climates may need only 38 Watts/Sq. Ft. spacing. 3. Determine the square footage of the area to be melted. Do not include areas under built-ins like planters or similar obstructions. Stay 3-6" from edges of slabs and do not cross expansion joints if possible. Add up all the areas to be melted and round down the nearest mat size(s) to fill the area. Either 2'-wide or 3'-wide mats can be selected. Only at flooringsupplyshop.com Lowest Price Guarantee click here for full detail Not sure what and how many you need, we here to Help Contact flooringsupplyshop.com by Phone 877-880-8453 (TILE) , Email, or Fax, or stop by our store with the layout of your room and we will give you complete list of what you need. Click on our Flooring Calculator to calculate not just how many electrical floor heaters you need, you can also see how much it will cost you daily or yearly, and adjust your uses base on your electrical floor heating budget. SunTouch ProMelt Installation Manual SunTouch 25 years Warranty

Warmup Snow and Ice Melting Cable WSM - 122 to 200 sq ft Available Voltage: 240/480 Volt for use under Asphalt, Concrete or Pavers Warmup Snow Melting Cables WSM are uniquely designed for snow melting in parking lots, driveways, pavements, stairs, etc. with total safety. They are suitable for embedding under concrete, asphalt or under pavers. Come with a 10-Year warranty. CABLE SPACING COVERAGE Volt Cable length (ft) Resistance (??) Amps Watts 3 pegs 4 pegs 5 pegs 240 500 9.6 25.0 6000 122 181 200 480 500 46.15 10.4 6000 122 181 200 ADVANTAGES 16ft cold lead, single point connection Installation in sand, gravel or on wire mesh. The WSM (Warmup Snow Melting Cable) is commonly used in concrete pours, asphalt driveways and paved walkways. All Warmup Cables are rated for 208-240-277V applications. Embedded up to 4" deep, they can be laid out as tire-tracks or for full coverage designs Specifications; Operating voltage - 240V & 480V Output rating - ?? 50 W/sq ft Lengths - Range from 84??? (25m) up to 500??? (152m) Construction - Energy efficient twin-conductor heating cable of 1/4??? (6mm) Maximum temperature - 464??F (240??C) Cold tail length - 16.4??? (5m) Warranty - 10-Year Applications Suitable Coverings - Pavers and related masonry, Asphalt (direct contact or indirect contact), Concrete (not lightweight) Suitable Base - Crushed gravel base, Sand bed, Insulation sheets Min. coverage - 2", Max. coverage - 4" Installation under PAVERS - Cables should be covered with 2" of sand for paver application. Pavers to be maximum 4" thick. Installation under ASPHALT - Cable will withstand direct asphalt contact for limited time until asphalt cools. For pours hotter than 220F, apply a layer of 2" of sand over the cable prior to laying asphalt. Do not use rollers over 2 Ton. Hand-rolling highly recommended. Installation under CONCRETE - Ensure the pour is 4" maximum over the cable. Use re-mesh or wire mesh to secure the cable in the middle of the pour for deeper pours. Cable/Mats can be zip tied to mesh and mesh can be raised with bricks or pulled during pour. WARRANTY & MAINTENANCE - When installed according to the installation manual and proper testing has been performed throughout, the system requires no maintenance for the duration of its warrantied life. The WSM cable is warrantied for 10 years against manufacturer???s defects and is protected by Warmup???s SAFETYnet guarantee. WarmUp Snow Melting Specifications and installation WarmUp Snow Melting Questions & Answers