Paint
When it comes to paint and painting materials, you need the best of the best to get the right results. Using the wrong construction paint or construction paint materials can ruin an entire project’s look, so it’s worth purchasing the right building painting products the first time through.
If you’re after high-quality painting materials for construction, look no further than AMAST! In addition to paint building materials like brushes, tape, and sponges, we have paint, sealers, wood stains, and more.
AFM Safecoat Concrete Floor Paint, Low VOC, 1 Qt
$19.54
This unique waterborne coating is ideal for interior concrete floors, dimensionally stable decks including magnesite, walkways, breezeways and patios. It provides a hard, tough coating, yet contains no offensive solvents, fumes or odors. It dries quickly, cleans up with water and provides a tough, monolithic film for lasting protection. Safecoat Concrete Floor Paint is fully tintable.
Trojan Color Sealer, Newport Blue, 1 Gallon
$50.95
The same penetrating polyester formula as our Trojan Masonry Sealer yet also includes a semi-transparent color and still comes with a 15 Year Waterproofing Warranty. TYPICAL USES: For industrial, commercial, and residential use. This all in one concrete sealer and UV resistant semi-transparent color stain can be applied to any porous surface including concrete, masonry, and brick or concrete pavers. Safe for indoor or exterior use.
Glaze N Seal Neutralizing Rinse Quart
$14.95
Glaze N Seal Neutralizing Rinse Quart Fast and easy way to neutralize acid residue from concrete, masonry, stone, tile, brick, and grout before sealing surface. It restores proper pH balance to improve sealer bond ability. Phosphate free concentrate mixes with water to make ten gallons of rinse. The benefit is the sealer will bond better to the surface, reducing the likelihood of sealer failure. Also, is effective cleaner. Uses Use on all Concrete, Brick, Tile, Stone and Masonry when acid has been previously used in cleaning or etching process. It may also be used as an alkaline cleaner for soil removal. Features Prevents acid/sealer failures Makes up to 10 gallons of solution Effective cleaner Phosphate free. Environmentally responsible Application Procedure as Neutralizer 1. Dissolve 3-5 ounces per gallon of warm water. (For large project, 1/2 container per 5 gallons of water). 2. Flood surface or apply liberally. 3. Allow to stand 1-5 minutes. 4. If necessary, surface may be scrubbed to remove any stubborn stains. 5. Remove with wet vacuum, mop or sponge. 6. Thoroughly rinse with clean water. 7. Allow surface to dry (at least 24 hours) before sealing. As Cleaner 1. Dissolve 8-10 ounces per gallon of water. 2. Apply to surface. 3. Scrub to remove stubborn stains. 4. Remove solution, rinse and dry. When using acid, the acid rinse water can be neutralized by adding Neutralizing Rinse prior to septic or sewer disposal. CAUTIONS Contains sodium carbonate and sodium sesquicarbonate. Avoid contact with eyes and prolonged contact with skin. In case of eye contact, flush freely with water. If swallowed, give water and call a physician.
Trojan Color Sealer, Ocean Blue, 1 Gallon
$50.95
The same penetrating polyester formula as our Trojan Masonry Sealer yet also includes a semi-transparent color and still comes with a 15 Year Waterproofing Warranty. TYPICAL USES: For industrial, commercial, and residential use. This all in one concrete sealer and UV resistant semi-transparent color stain can be applied to any porous surface including concrete, masonry, and brick or concrete pavers. Safe for indoor or exterior use.
Miracle Counter Kleen Wipes
$5.00
Miracle Counter Kleen - Wipes 35 Pre-measured wipes Deep Cleaning Action for Polished Counters of: ??? Marble ??? Granite ??? Travertine Limestone ??? Ceramic Tile Product Description Counter Kleen is a unique formula designed to remove dirt and grime from polished natural stone including marble, granite, limestone, travertine and ceramic tile counters, vanities and furniture. Counter Kleen is easy to use, simply spray it onto the surface and wipe away the dirt and grime with no rinsing, no streaking and no soap residue. Counter Kleen will not harm polished natural stone or other acid sensitive surfaces. Great for use in the kitchen. For counter surfaces only. Application Instruction Remove all loose dirt and debris from the counter. The counter must be free from any previously applied coatings or waxes. Ready to use. Spray onto the counter and agitate with a towel or sponge as needed. Wipe the counter thoroughly dry using a dry, clean towel. No rinsing is necessary. Always Sample Testing Due to the differences of each substrate, several inconspicuous test patches should be completed to assure maximum performance. User must determine the suitability of the product for their intended use. Ongoing Maintenance For ongoing maintenance instructions please refer to Miracle Sealants Care Guide. Refer to the Miracle Sealants Product Recommendation Chart for specific product recommendations. Water, Stain & Slip Protection To protect clean surfaces from future soiling and staining we recommend applying the appropriate Miracle Penetrating Sealer/Impregnator. Polish Enhancement Use Stone Polish as directed. Mold, Mildew and Bacteria Sanitation For best results in killing mold, mildew, bacteria and other micro organisms, use Miracle Wipes as directed. Read entire label and PDS/MSDS before using. Coverage: Coverage will vary depending on density, porosity, texture, surface absorption, weather, time solution left on the surface and application method. Used as directed, Counter Kleen will cover approximately 500 square feet per 32 ounce spray bottle.
AFM Safecoat Paint, SemiGloss, Zero VOC , 1 Qt
$17.84
This premium quality, fast-curing enamel pain is designed for interior surfaces where a durable semi-gloss finish and superior film formation are needed. It provides a superior finish and is fully tintable to all colors. Ideal for areas where the health of occupants is a concern: schools, hospitals, homes, offices, or anywhere people want to reduce their exposure to toxic chemicals. Safe for the chemically sensitive.
Trojan Color Sealer, Dark Grey, 1 Gallon
$50.95
The same penetrating polyester formula as our Trojan Masonry Sealer yet also includes a semi-transparent color and still comes with a 15 Year Waterproofing Warranty. TYPICAL USES: For industrial, commercial, and residential use. This all in one concrete sealer and UV resistant semi-transparent color stain can be applied to any porous surface including concrete, masonry, and brick or concrete pavers. Safe for indoor or exterior use.
AFM Safecoat MetalCoat Primer, Low VOC, Metal, 1 x 5 Count, 1 Gallon
$259.24
This thermoplastic acrylic emulsion primer is fortified with rust-inhibiting pigments and designed for use on non-ferrous metal, iron, steel, aluminum, galvanized and masonry (not recommended for copper). It provides a tough, flexible film for outstanding corrosion resistance and excellent adhesion.
AFM Safecoat MetalCoat Primer, Low VOC, Metal, 1 Qt
$17.84
This thermoplastic acrylic emulsion primer is fortified with rust-inhibiting pigments and designed for use on non-ferrous metal, iron, steel, aluminum, galvanized and masonry (not recommended for copper). It provides a tough, flexible film for outstanding corrosion resistance and excellent adhesion.
Envirosafe Exterior Wall Coating, Monterey Sand, 8 oz
$7.95
A specially formulated flexible 100% acrylic coating specifically designed for use on a variety of surfaces. It's unique formulation provides excellent durability, superior fade resistance and a smooth low sheen that resists cracking, peeling, and chipping while bridging hairline cracks. This above grade coating is designed to withstand wind driven rains up to 100 miles/hr. while it allows moisture vapors from within the structure to evaporate and escape out through the membrane. As it is very resistant to salts and other elements, it is superior to paints for homes/structures that are located near harsh weather conditions such as beaches. Designed for exterior use only. Ten Year Warranty (2 coats)TYPICAL USES: For residential, commercial, and industrial use on concrete block walls, brick walls, poured concrete walls, stucco, metal, and wood.PRODUCT ADVANTAGES: Versatility * Durability * Bridges Hairline Cracks * Resists Cracking & Peeling * Waterproofs * Low Temperature Flexibility * Applies Easily * Water Clean-Up * Low Sheen * Low VOCPHYSICAL CONSTANTS:* State: Thick Liquid* Thinning: Stir thoroughly & apply as it comes from container - DO NOT THIN* Solubility in Water: Dilutable. Supplied at normal application viscosity - DO NOT THIN* Flash Point: 248 Deg. F* Freezing Point: 0 degrees C./32 degrees F.* Coating VOC: 0.42 lb./gal. - (50 grams/liter)* Solids: By volume: 44.37% (varies by color) By Weight: 58.66% (varies by color)* Film Thickness: Wet: 10 mils; Dry: 5 mils (Estimated at 125 sq.ft./gal)APPLICATION:Method: Brush, Roll or SprayTheoretical Coverage: 1st COAT: 75-125 sq.ft./gal. depending on roughness of surface 2nd COAT: 100-175 sq.ft./gal. Manufacturer recommends two (2) coats.Estimated Dry Time: To Touch in 1-2 Hrs; Recoat in 24 Hrs; Fully Cured in 72 HrsApplication Instructions: See Product Data Sheets (PDS)SHIPPING & STORAGEContainer Type: 1 Gallon * 5 Gallon PailShipping Weight: 11.6 lbs. * 58 lbs.Average Shelf Life: 12 months minimum from date of manufacture when maintained in protected storage. Storage at 40-90 degrees Fahrenheit
AFM Safecoat Elastomeric Sealer, DynoFlex Textured, Low VOC, 1×5 Gallon, 5 Gallon
$275.39
This water-based, low-odor elastomer sealer comes in a paste-like compound for sealing seams, joints and cracks in new and old heating and air conditioning ducts, and for repairing metal roofs and asphalt shingles. Also comes in a sprayable form that can be used over Safecoat? DynoSeal as a topcoat for roofs and decks. Highly resistant to harsh weather and temperature changes.
TAVY Thin-Skin 007 Glue
$24.95
TAVY Thin-Skin 007 Glue 1 Gallon TAVY #007 Glue is a high-end multi-purpose adhesive high in solids, which will adhere to any surface. Scarifying the existing surface before use is not necessary. The only surface preparation required is to have a clean surface that is free from oil, water, wax and dust. The TAVY Thin-Skin Two-Part Underlayment System will allow anyone to set tile over any sound surface. The TAVY Thin-Skin Underlayment is simply trimmed to size and glued to the existing area, using TAVY #007 Glue. Skim-coat the top of the TAVY Thin- Skin Underlayment and you're ready to set tile TAVY Thin-Skin Underlayment is a technically engineered non-woven fiberglass reinforced fabric/paper Tavy Thin-Skin use on: ??? Plywood ??? Lumber ??? Linoleum ??? VCT ??? Vinyl ??? Cut Back Adhesive Residue ??? Formica Type Laminates ??? Sound Painted Surfaces ??? Porcelain ??? Plastic ??? Metal ??? Fiberglass ??? Corian ??? Cultured Marble ??? Dry Wall ??? Ceramic Tile ??? Porcelain Tile ??? Concrete Benefit Increase tiling applications by eliminating tear outs of the existing surface Allows for tile or stone to be set on any sound surface Lightweight and easier to transport (less than 15 lbs. per 100 square feet) NO dusty mess to clean up NO additional height added to any surface as opposed to current underlayments NO waste, all TAVY Thin-Skin Underlayment pieces are usable regardless of size and shape 25% - 50% lower cost than other underlayments One roll of TAVY Thin-Skin Underlayment and one gallon of TAVY Thin-Skin #007 Glue will cover 100 square feet Thin-Skin Underlayment is ideal for making templates for difficult cuts No need to buy or install nails/screws Minimize overall load weight Crack suppression up to 1/8" over concrete 5-Step Easy Installation Step 1: Installer should sweep the sub-surface and make sure that the sub-surface is free from oil, wax, and dust. Step 2: Apply TAVY Thin-Skin #007 Glue to the sub-surface using a minimum 1/8" v-notched trowel. Step 3: Install TAVY Thin-Skin Underlayment by unrolling the product into the wet #007 Glue. The Underlayment should be pressed into the #007 Glue with the flat edge of a trowel to remove all air and to ensure the bond between sub-surface and Underlayment. No cure time is required moving from Step 3 to Step 4 Step 4: Mix a batch of mortar that is the consistency of syrup. This mortar is then used to Skim-Coat the Underlayment. The Skim-Coat is performed with the flat edge of a trowel. This procedure helps key-in the mortar to the Underlayment. The final dried result will be a surface that looks like a rough concrete floor. Step 5: Start setting tile over the dry Skim-Coated Thin-Skin Underlayment according to industry standards as if you are tiling over any new clean tile-able surface or installed backer board system. Watch the TAVY Thin-Skin Underlayment System Video
AFM Safecoat Eggshell Paint, Zero VOC , 1 x 5 Count, 1 Gallon
$259.24
This premium quality, fast-curing enamel is designed for interior surfaces where an eggshell finish and superior film formation is needed. It provides a superior finish and is fully tintable to all colors. Ideal for areas where the health of occupants is a concern: schools, hospitals, homes, offices or anywhere people want to reduce their exposure to toxic chemicals. Safe for the chemically sensitive.
AFM Safecoat HardSeal, Blocks VOC Offgassing, 1 Gallon
$48.44
This multi-use, clear gloss sealer is formulated to provide mar resistance to both low- and high-porosity surfaces. It forms a continuous membrane when applied properly so it is particularly effective at sealing in any outgassing pollution or toxic chemical compounds.
Envirosafe Exterior Wall Coating, Terra Cotta, 5 Gallon
$254.75
A specially formulated flexible 100% acrylic coating specifically designed for use on a variety of surfaces. It's unique formulation provides excellent durability, superior fade resistance and a smooth low sheen that resists cracking, peeling, and chipping while bridging hairline cracks. This above grade coating is designed to withstand wind driven rains up to 100 miles/hr. while it allows moisture vapors from within the structure to evaporate and escape out through the membrane. As it is very resistant to salts and other elements, it is superior to paints for homes/structures that are located near harsh weather conditions such as beaches. Designed for exterior use only. Ten Year Warranty (2 coats).
Connect contractors, sub-contractors, management companies, and developers with construction material suppliers
Copyright © 2022 AMAST. All rights reserved.
Submit you post here.
Please be patient after posting, because your article must be reviewd by one of our editors.
Thank you!