Generic filters
EasyHeat Extra Temperature Sensor

EasyHeat Extra Temperature Sensor In Stock Ship Same Day 10 ft long dual use 120/240 Volt Minimum distance of 6″ (15.24 mm) the sensor wire should extend between two adjacent runs of heating cable, measured from the arc of the Return Loop The Temperature sensor wire monitors actual floor temperature for accurate comfort control. If you are adding Extra Temp Sensors, run both sensors from the control box to the floor below and then weave them into the mat 6 to 12 inches from the wall. You can put them side by side, but connect only one to the thermostatic control. If you ever need to replace a faulty sensor, you???ll have one at your fingertips Install the thermostat sensor wire at the same time as the heating mat installation, as it must also be embedded in the cementitious based mortar The resistance of the sensor wire should be between 7 and 14 Kohms Do not use staples to affix thermostat sensor wire, cold lead, or heating cables Warm Tiles Elite Mats are designed for today’s most popular floors, including: Easy Heat Elite Installation Instruction FGS Programmable Thermostat Installation Instruction Toll free 877 880 8453 or Email  

Copyright © 2022 AMAST. All rights reserved.

Submit you post here.

Please be patient after posting, because your article must be reviewd by one of our editors.
Thank you!

Please complete the required fields.
Please select your image(s) to upload.

New Account

Please complete the details below and we'll be in contact as soon as possible.