Raimondi Rai-Fix safety withholding Hooks 8mm Mechanical support system for minimum 3/8″ thick tile/slab – 5/16″ Wing Size The RAI-FIX Anchoring system provides a simple and effective solution to prevent the fall of the tiles applied vertically with adhesive in case of detachment from the wall. The safety withholding hook, of RAI-FIX is made of stainless steel and can be used with tile slabs with a minimum thickness of 1/4″ (6mm) It is the perfect solution because it is completely invisible once the facade is installes. When installing tiles/slabs bigger that 12??? (being them in ceramic, porcelain or natural stone) in fa??ade with adhesive, it is required to use a mechanical safety system which prevents the tile / slab to fall down in the event of detachment of the adhesive.* Indeed adhesives guarantee perfect anchorage of the tile/slab only if perfectly applied. But this is not always the case. In addition to that, it is hard to predict the strains the tile/slab will have to bear because of building???s settlement as well as expansion for temperature range, extreme weather conditions, earthquake and so on??? Therefore, the safety withholding hook RAI-FIX is a crucial ally of the architect/designer (and of course of the buyer) to assure the maximum safety. In addition to that RAI-FIX expands the design possibilities since tiles and slabs of any size can be now used. Aesthetically speaking, RAI-FIX is the perfect solution since it is completely invisible once the fa??ade is done. In fact RAI-FIX has to be placed between the tile / slab and the wall and therefore it is 100% hidden. The safety withholding hook RAI-FIX is made of stainless steel and can be used with tiles / slabs of minimum thickness 6 mm (0.24 inches). The installation is very simple and is carried out directly on the jobsite in a few seconds. * Regulations may vary from Country to Country. Therefore it is necessary to refer to the legislation in force in the area where the building /jobsite rises Tensile strength laboratory tests gave the following result: 198 lbs. With 10 holes ?? 5/16″ and one hole ?? 9 1/3″ for inserting the anchor screw. Made in premium quality stainless steel. With the RAI-FIX installation of large tiles and slabs on a vertical surface is very simple and carried out directly on the job site. The safety withholding hook is a simple and effective device that prevents the tile of slab from falling down in the event of detachment. The safety withholding hook, of RAI-FIX is made of stainless steel and can be used with tile slabs with a minimum thickness of 3/8″ (8mm) Rai-Fix Mechanical Support System Specifications
Please be patient after posting, because your article must be reviewd by one of our editors.
Thank you!